Skip to content
Omnikalc

Potential temperature calculator: what would your air parcel feel at 1,000 mb?

Enter the air temperature, the pressure and a second pressure level to get the potential temperature and the temperature of a dry-adiabatic parcel at the second level.

Updated on
Your inputs
°F

Value out of range

mb

Value out of range

mb

Value out of range

Results

Potential temperature

296.6 K

Potential temperature in Fahrenheit
74.2 °F
Temperature at the second level (dry adiabatic)
22.5 °F
Temperature change on moving to the second level
-27.5 °F

Air cools as it rises and warms as it sinks, even without any heat being added, so its temperature alone does not tell you much about where it came from. The potential temperature calculator takes the air temperature, the pressure and a second pressure level, and gives the potential temperature θ, its value in degrees Fahrenheit, the temperature at the second level for a dry-adiabatic move, and the temperature change.

How the calculation works

  • Enter the air temperature, the air pressure at that level in millibars (mb, the same as hPa), and the pressure of a second level.
  • The calculator converts the temperature to kelvin and applies Poisson’s equation: θ = T × (1000 / P)^0.2857, where 0.2857 is the ratio of the gas constant to the specific heat of dry air.
  • The potential temperature θ is the temperature that the air would have if it were brought dry-adiabatically to the standard pressure of 1,000 mb.
  • The calculator also moves the parcel to the second level without heat exchange and gives the new temperature, which shows the cooling of rising air or the warming of sinking air.

Example

Air at 50 °F (283.15 K) and 850 mb has a potential temperature of 283.15 × (1,000 / 850)^0.2857 = 296.6 K, which is 74.2 °F. If a parcel of this air rises to 700 mb without any heat exchange and without condensation, it cools to 22.5 °F, a drop of 27.5 °F.

Why it matters

Potential temperature is a basic tool of weather analysis. Forecasters use it to follow air masses at different heights, to see where the atmosphere is stable or unstable, and to study mountain waves and fronts. Pilots, glider pilots and students use it to understand why air cools when it climbs a mountain and warms on the way down.

Good to know

The equation is exact for dry air that is lifted or lowered without heat exchange, and it uses the constant 0.2857 (R/cp for dry air), which is accurate to about 0.1 %. Moisture changes the constant slightly and adds latent heat in cloud. Real motion also mixes air with its surroundings, so the result is a reference and not a forecast.

The cloud base calculator estimates where rising air condenses, the barometric pressure calculator links pressure to altitude, the dew point calculator gives the saturation temperature, and the density altitude calculator shows how air thins with height and heat.

Frequently asked questions

What is potential temperature used for?

It labels an air parcel with a number that does not change when the parcel rises or sinks without exchanging heat. Meteorologists use it to follow air masses, to find fronts, and to judge stability: if θ increases with height, the atmosphere is stable, and if it decreases, it is unstable and convection can start.

Why is the reference pressure 1,000 mb?

It is a convention close to the average sea-level pressure, which makes the values of θ easy to compare between maps and levels. Some texts use 1,000 hPa, which is the same value, and a few older ones use 1,013.25 hPa. The choice only shifts all values by the same factor.

What is the dry adiabatic process?

A parcel that rises expands because the pressure falls, and this expansion cools it. If there is no heat exchange and no condensation, the cooling follows Poisson’s equation and equals about 9.8 °C per kilometre (5.4 °F per 1,000 ft). Once the air is saturated, condensation releases heat and the cooling is slower.

Can I use the result for a cloudy parcel?

No. The calculator is for dry air, or for air that stays below saturation. For a saturated parcel, use the equivalent or wet-bulb potential temperature, which adds the latent heat released by condensation. You can still use θ to see whether the lifted dry air would reach its dew point, with the cloud base calculator.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.