Skip to content
Omnikalc

Butler-Volmer equation calculator

Enter the overpotential, the exchange current density, the anodic and cathodic transfer coefficients and the temperature to get the net current density, its two parts and the charge-transfer resistance.

Updated on
Your inputs
mV

Value out of range

mA/cm²

Value out of range

Value out of range

Value out of range

°C

Value out of range

Results

Net current density

0.6858 mA/cm²

Anodic part
0.7001 mA/cm²
Cathodic part
0.0143 mA/cm²
Linear approximation (small overpotential)
0.3892 mA/cm²
Charge-transfer resistance
256.9 Ω·cm²
Cathodic share of the anodic current
2.04 %
Both reactions matter near equilibrium

The Butler-Volmer equation calculator gives the net current density of an electrode, its anodic and cathodic parts, the linear approximation and the charge-transfer resistance from the overpotential and the exchange current density.

How the calculation works

  • Enter the overpotential and the exchange current density.
  • Enter the transfer coefficients and the temperature.
  • The calculator gives the net current, the two parts, the linear approximation, the resistance and the reverse share.

Example

At 25 °C, F / RT is 38.92 V⁻¹. For an overpotential of 100 mV, an exchange current of 0.1 mA/cm² and α = 0.5 each way, the anodic part is 0.1 × exp(1.946) = 0.7001 mA/cm² and the cathodic part 0.0143 mA/cm². The net current is 0.6858 mA/cm². The charge-transfer resistance is 256.9 Ω·cm², and the linear formula would give 0.3892 mA/cm², which shows its limit.

Why it matters

The calculator helps electrochemistry students, researchers in batteries, sensors and fuel cells, and engineers who model electrodes and interpret impedance spectra.

Good to know

The equation assumes that charge transfer is the only slow step. In real cells, the transport of species to the surface and the resistance of the solution add to it, and the measured curve flattens at the limiting current. The overpotential is the electrode potential minus its equilibrium value, so the Nernst equation gives the reference. For the anodic and cathodic coefficients, a sum of one is common for a single-electron step. Dividing by the real surface area gives a current density per true area. Negative overpotentials give a negative net current, which is a reduction. Keep the exponent below about 40 to avoid numerical overflow in your own calculations.

The Tafel equation calculator covers large overpotentials, the Nernst calculator gives equilibrium potentials, the Arrhenius calculator treats temperature effects and the Faraday induction calculator covers electromagnetic induction.

Frequently asked questions

What does the Butler-Volmer equation describe?

It gives the current density of an electrode reaction controlled by charge transfer: i = i0 [exp(αa F η / RT) − exp(−αc F η / RT)]. The first term is the oxidation, the second the reduction, and at equilibrium (η = 0) they cancel at the exchange current i0.

When does it simplify?

For a small overpotential below about 10 mV, it becomes linear: i ≈ i0 (αa + αc) F η / RT, like Ohm’s law, with a charge-transfer resistance R / (i0 F) for α sum of one. At large overpotentials, one exponential dominates and it gives the Tafel law.

What does the exchange current tell?

It measures how fast the reaction runs at equilibrium in each direction. A high value means a fast, reversible reaction, such as hydrogen on platinum, and a low value means a sluggish one that needs a large overpotential, such as oxygen reduction.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.