Skip to content
Omnikalc

Dulong–Petit law calculator

Enter the molar mass of a solid element and its measured specific heat to compare it with the Dulong–Petit prediction of 3R per mole.

Updated on
Your inputs
g/mol

Value out of range

J/(kg·K)

Value out of range

kg

Value out of range

K

Value out of range

Results

Predicted specific heat

392.5 J/(kg·K)

Dulong–Petit molar heat capacity (3R)
24.94 J/(mol·K)
Measured molar heat capacity
24.47 J/(mol·K)
Difference between measured and predicted
-1.9 %
Atomic mass estimated from the measured specific heat
64.8 g/mol
Heat to warm the sample (measured value)
19.25 kJ

The Dulong–Petit law calculator gives the molar heat capacity of 3R, the predicted specific heat of a solid element, the measured molar heat capacity, the difference between the two, the atomic mass estimated from the specific heat and the heat to warm a sample.

How the calculation works

  • Enter the molar mass of the element, in grams per mole.
  • Enter its measured specific heat, in joules per kilogram and kelvin.
  • Enter the mass of a sample and a temperature change to get the heat needed.

Example

For an element of molar mass 63.55 g/mol g/mol, the law gives 24.94 J/(mol·K) per mole and a specific heat of 392.5 J/(kg·K). The measured value of 385 J/(kg·K) is -1.9 % away, a molar heat capacity of 24.47 J/(mol·K), and implies an atomic mass of 64.8 g/mol. Warming 1 kg kg by 50 K K takes 19.25 kJ.

Why it matters

The calculator helps students of physics and chemistry who study the heat capacity of solids, who repeat the historical way of estimating atomic masses or who want to see how far a real element is from the classical prediction.

Good to know

The law is a high-temperature classical limit. It holds for most metals near room temperature and fails for light, hard elements and below about the Debye temperature, where the quantum behavior lowers the heat capacity. Use the specific heat at constant pressure and the same temperature for the comparison. The difference between the two heat capacities at constant pressure and constant volume is small for solids, a few percent, and the law is more of a guide than an exact rule. The heat output uses the measured specific heat, and not the prediction.

The specific heat calculator gives the heat for a temperature change, the calorimetry calculator handles mixing, the heat conduction calculator covers the flow of heat and the molar mass calculator computes the mass of a gas.

Frequently asked questions

What is the Dulong–Petit law?

It states that the molar heat capacity of most solid elements at room temperature is close to 3R, about 24.94 J/(mol·K), where R is the gas constant. Each atom in a solid is a three-dimensional oscillator with an energy of 3kT, which gives this value by the classical equipartition of energy.

How good is the law?

It works well for many metals at room temperature, within a few percent, but it fails for light elements with strong bonds, such as carbon as diamond, boron and beryllium, and at low temperatures, where the heat capacity drops toward zero. The quantum models of Einstein and Debye explain these deviations.

How was it used historically?

In the nineteenth century, chemists used the measured specific heat of a metal to estimate its atomic mass as 3R divided by the specific heat, which helped to fix the atomic weights of the elements. The calculator gives this estimate, which you can compare with the molar mass.

Does the law apply to compounds?

In its extended form, the Kopp–Neumann rule, the molar heat capacity of a solid compound is about 3R per mole of atoms, so a compound with n atoms per formula unit has about 3nR. It is a rough rule that is less reliable than for elements.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.