Skip to content
Omnikalc

Ekman layer calculator: how does the wind move the surface of the ocean?

Enter the wind speed, the latitude, the eddy viscosity and the drag coefficient to get the wind stress, the Ekman depth, the Ekman transport and the surface current.

Updated on
Your inputs
mph

Value out of range

°

Value out of range

m²/s

Value out of range

Value out of range

Results

Ekman layer depth

337 ft

Wind stress on the sea surface
0.125 N/m²
Ekman transport per mile of coastline
73,758 ft³/s
Surface current speed
0.11 knots
Surface current direction
45 ° to the right of the wind (northern hemisphere)

When the wind blows over the ocean, it drags the surface water, but the Earth’s rotation bends the current to the right in the northern hemisphere. The Ekman layer calculator takes the wind speed, the latitude, the eddy viscosity and the drag coefficient, and gives the wind stress, the Ekman depth, the Ekman transport per mile of coastline, the surface current speed and its direction.

How the calculation works

  • Enter the wind speed 10 m above the sea, the latitude, the vertical eddy viscosity of the upper ocean and the drag coefficient of the wind.
  • The calculator finds the wind stress τ = ρair × Cd × U², with an air density of 1.2 kg/m³, and the Coriolis parameter f = 2Ω sin(latitude).
  • It then gives the Ekman depth D = π √(2 Az / f), the depth over which the wind-driven current turns and fades, and the surface current V₀ = τ / (ρ √(Az f)).
  • The Ekman transport, τ / (ρ f), is the volume of water moved per second per unit width. It points 90° to the right of the wind in the northern hemisphere and to the left in the southern hemisphere.

Example

A wind of 20 mph (8.94 m/s) blows over the sea at 40° latitude, with Az = 0.05 m²/s and Cd = 0.0013. The wind stress is 0.125 N/m² and f = 9.37 × 10⁻⁵ s⁻¹. The Ekman depth is π √(2 × 0.05 / 9.37 × 10⁻⁵) = 102.6 m, or 337 ft. The transport is 1.30 m²/s, or about 73,800 ft³/s per mile of coastline, and the surface current is 0.11 knots, directed 45° to the right of the wind.

Why it matters

Ekman theory explains upwelling, the winds that drive the great ocean gyres and the fertility of the sea along some coasts. Students use it to learn how rotation changes the flow, and it is the first step to estimate the effect of storms and of seasonal winds on currents and on the temperature of the sea surface.

Good to know

The theory assumes a steady wind, a deep ocean with a constant viscosity and no coast, no waves and no stratification. The real surface current is often smaller than the result and the turning is less than 45°, because of waves and of stratification. The transport formula is robust, while the depth and the speed depend on a viscosity that is uncertain. Use the results as orders of magnitude.

The Coriolis effect calculator covers the rotation of the Earth, the geostrophic wind calculator covers the balance in the air, the wind setup calculator covers the rise of water driven by wind in shallow water, and the wave power calculator covers the energy of the waves that the wind makes.

Frequently asked questions

What is the Ekman layer?

It is the upper layer of the ocean where the wind drives a current that turns with depth, because of the Coriolis effect and friction. At the surface, the current flows 45° to the right of the wind in the northern hemisphere. With depth, it turns further to the right and gets weaker, in a spiral, until it fades at about the Ekman depth.

Why is the net transport at 90° to the wind?

When the current is added up over the whole depth of the Ekman layer, the turning of the flow makes the net motion 90° to the right of the wind in the northern hemisphere, and 90° to the left in the south. This is the Ekman transport, and it does not depend on the viscosity. It is the reason for coastal upwelling and downwelling.

How does it cause coastal upwelling?

When the wind blows with the coast on its left in the northern hemisphere, as for northerly winds along the coast of California, the transport pushes the surface water away from the shore. Cold, nutrient-rich water rises from below to take its place, and this feeds some of the richest fisheries in the world.

What value of the eddy viscosity should I use?

The viscosity of the ocean is turbulent and varies with the wind, the waves and the stratification. Values of 0.01 to 0.1 m²/s are common for the upper ocean, and the Ekman depth observed is often 20 to 100 m. The depth and the surface current depend on this value, but the Ekman transport does not.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.