Skip to content
Omnikalc

Wind setup calculator: how much does the wind pile up the water on a shore?

Enter the wind speed, the fetch and the water depth to get the wind setup and the rise and fall of the water at the two shores.

Updated on
Your inputs
mph

Value out of range

mi

Value out of range

ft

Value out of range

Results

Water level difference between the two shores

2.26 ft

Rise at the downwind shore
1.13 ft
Fall at the upwind shore
1.13 ft
Setup as a share of the water depth
15.1 %
Within the range of the simple formula

When a strong wind blows along a lake or a shallow bay, it drags the water along and piles it up at the far shore, and the near shore can fall below its usual level. The wind setup calculator takes the wind speed, the fetch and the average depth, and gives the water level difference between the two shores, the rise at the downwind shore, the fall at the upwind shore and the setup as a share of the depth.

How the calculation works

  • Enter the wind speed, the fetch, which is the length of open water over which the wind blows, and the average depth of the water.
  • The calculator applies the Zuiderzee equation for wind setup: S = k × U² × F / (g × d), with k = 3.2 × 10⁻⁶.
  • The water piles up at the downwind shore and falls at the upwind shore, each by about half of S relative to the still-water level.
  • A shallow lake or bay with a long fetch gives a larger setup, and the setup grows with the square of the wind speed.

Example

A wind of 50 mph (22.4 m/s) blows over 12 mi (19.3 km) of water with an average depth of 15 ft (4.57 m). The setup is 3.2 × 10⁻⁶ × 22.4² × 19,312 / (9.81 × 4.57) = 0.69 m, or 2.26 ft. The water rises 1.13 ft at the downwind shore and falls 1.13 ft at the upwind shore, which is 15.1 % of the average depth.

Why it matters

Wind setup drives flooding on lakes and bays, damaged docks and lowered water at launch ramps. A quick estimate helps to judge the risk to a shore property or a boat ramp in a strong wind, to compare lakes of different depth and to see why shallow water is so sensitive to the wind.

Good to know

The Zuiderzee formula is an empirical rule for a uniform depth, a steady wind along the axis of the basin and a closed shore. It ignores the shape of the basin, the earth’s rotation, the seiche that follows when the wind drops, the waves and the air pressure. For a design level of flood protection, use a hydrodynamic model. Treat the result as a first estimate.

The hydraulic jump calculator covers sudden changes of open flow, the weir flow calculator measures discharge, the peak flow calculator estimates floods, and the Manning equation calculator gives the flow in channels.

Frequently asked questions

What is wind setup?

It is the rise of the water level on the downwind side of a lake, a bay or a shallow sea caused by the drag of the wind on the surface. The wind pushes the surface water toward the shore, and the water level tilts until the pressure gradient balances the wind stress. It is a major part of the storm surge in shallow seas and a cause of flooding on lakes.

What does the Zuiderzee equation say?

It says that the setup is proportional to the square of the wind speed and the fetch, and inversely proportional to the depth: S = k U² F / (g d). The empirical constant k is about 3.2 × 10⁻⁶ and comes from observations in the Zuiderzee in the Netherlands. The setup is much larger in shallow water, which is why large shallow lakes such as Lake Erie are known for it.

Why does the water fall at the upwind side?

Because the water is pushed from one side to the other, the level falls where it comes from and rises where it goes. For a closed basin with no inflow, the average level stays the same, so the rise and the fall are about half of the total difference each. Boats at the upwind end can find the water much lower than usual.

Is the result the same as a storm surge?

Wind setup is one part of a storm surge. A full surge also includes the low air pressure of the storm, which raises the sea level by about 1 cm per hPa, the waves and the tide. The calculator covers the wind effect for an enclosed or shallow area, and not the open coast with a long fetch and a deep shelf.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.