Skip to content
Omnikalc

Electromagnetic wave intensity calculator: from W/m² to E field, B field and radiation pressure

Enter the intensity of a plane electromagnetic wave to get its peak and rms electric field, peak magnetic field, radiation pressure and energy density.

Updated on
Your inputs
W/m²

Value out of range

Results

Peak electric field E₀

868.02 V/m

Root-mean-square electric field
613.78 V/m
Peak magnetic field B₀
2.895 µT
Radiation pressure on a perfect absorber
3.336 µPa
Radiation pressure on a perfect reflector
6.671 µPa
Energy density of the wave
3.336 µJ/m³

Light, radio waves and X-rays are all electromagnetic waves. The electromagnetic wave intensity calculator takes the intensity in W/m² and gives the peak and rms electric field, the peak magnetic field, the radiation pressure on absorbers and reflectors and the energy density.

How the calculation works

  • Enter the intensity of the electromagnetic wave in watts per square meter. Full sunlight at the ground is about 1,000 W/m².
  • The intensity of a plane wave is I = ½ c ε₀ E₀², where E₀ is the peak electric field. The calculator solves for E₀ = √(2I ÷ (c ε₀)).
  • The magnetic field follows from B₀ = E₀ ÷ c. The rms electric field is E₀ ÷ √2.
  • The wave carries momentum, so it pushes on surfaces. The radiation pressure is I ÷ c on an absorber and 2I ÷ c on a perfect reflector, and the energy density is also I ÷ c.

Example

For an intensity of 1,000 W/m², E₀ = √(2 × 1,000 ÷ 0.0026544) = 868.0 V/m and B₀ = 868.0 ÷ 299,792,458 = 2.895 µT. The rms electric field is 613.7 V/m. Radiation pressure is 3.336 µPa on an absorber and 6.671 µPa on a reflector.

Why it matters

Physics courses in electromagnetism and optics use these relations to link the power of a wave to its fields. They are also used to estimate exposure to radio-frequency fields and to compare lasers and lamps.

Good to know

The formulas hold for a plane wave in vacuum or air. Real sources spread out, and near a transmitter the fields are not a simple plane wave. Exposure limits are based on much more detailed models than this calculator.

The photon energy calculator links frequency to energy, and the free space path loss calculator shows how intensity drops with distance.

Frequently asked questions

How is the intensity of a wave related to its fields?

The intensity is the average power per unit area carried by the wave. For a plane wave in vacuum, it equals half the product of the speed of light, the permittivity of free space and the square of the peak electric field. The magnetic field is the electric field divided by c.

What is radiation pressure?

Light carries momentum, so absorbing or reflecting it exerts a tiny pressure. A perfect absorber feels I ÷ c, and a perfect reflector feels twice as much, because the momentum is reversed. Solar sails and optical tweezers use this effect.

What is the difference between peak and rms fields?

The peak value E₀ is the largest value of the oscillating field. The rms value is the peak divided by √2 and is the value that gives the same average power in a resistive load. Both are used in the literature, so check which one is meant.

Does this apply to radio and Wi-Fi signals?

Yes, for a plane wave in free space the relations hold for any frequency. Intensity at a distance from a transmitter equals the transmitted power divided by the area over which it spreads.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.