Skip to content
Omnikalc

Stokes drift calculator for ocean waves

Enter the wave height, the period and a depth to get the wavelength, the Stokes drift at the surface and at depth, and the wave steepness.

Updated on
Your inputs
ft

Value out of range

s

Value out of range

ft

Value out of range

Results

Stokes drift at the surface

0.164 ft/s

Stokes drift at the chosen depth

0.144 ft/s

Wavelength (deep water)
327.7 ft
Wave steepness ka
0.0633
E-folding depth 1 / (2k)
26.08 ft
Stokes volume transport per unit width
4.276 ft²/s

The Stokes drift calculator gives the wavelength, the wave steepness, the Stokes drift at the surface and at a chosen depth, the e-folding depth and the volume transport of a deep-water wave, from its height and its period.

How the calculation works

  • Enter the wave height from crest to trough and the wave period in seconds.
  • Enter the depth below the surface where you want the drift.
  • Read the surface drift, the drift at depth and the transport.

Example

Waves of 6.6 ft with a period of 8 s have a wavelength of 327.7 ft and a steepness of 0.0633. The Stokes drift is 0.164 ft/s at the surface and 0.144 ft/s at 3.3 ft, with an e-folding depth of 26.08 ft. The transport is 4.276 ft²/s.

Why it matters

The calculator helps oceanography and coastal engineering students, mariners, search and rescue planners and researchers who estimate how waves push floating debris, oil slicks or drifters, and who want to see how much of the surface drift comes from the waves and not from the wind or the current.

Good to know

The formula is for a regular, deep-water wave, where the depth is greater than half the wavelength, and for small to moderate steepness. Use the significant wave height and the peak period for a first estimate of a real sea, remembering that the true spectral drift is higher. The result does not include the wind-driven current, the tide or the breaking of waves. For operational drift prediction, use a wave model and the full spectrum.

The ocean wave speed calculator gives the speed of a wave, the wave power calculator estimates the energy flux, the Iribarren number calculator classifies breaking waves on a slope and the tsunami speed calculator treats long shallow-water waves.

Frequently asked questions

What is the Stokes drift?

The Stokes drift is the net forward motion of water particles in a surface wave. Particles move in nearly closed orbits, but the orbit is slightly larger at the top than at the bottom, so over a wave cycle a particle advances a little in the direction of propagation. For deep-water waves the drift at depth z is u_s = a² ω k e^(2kz), with z negative below the surface.

Why does it matter?

The Stokes drift moves floating objects, oil, plastics, larvae and heat along with the waves, in addition to the currents driven by wind and tides. It also drives Langmuir circulation, the long wind-aligned rolls that mix the upper ocean. Drift prediction for search and rescue and pollution response includes it.

How does it change with depth?

The drift decays exponentially with depth, with an e-folding depth of 1 / (2k), which is about L / (4π), or one twelfth of a wavelength. At a depth of half a wavelength, the drift is negligible. It is therefore a feature of the top few meters in typical wind waves and a few tens of meters for long swell.

What are the limits of the formula?

The formula is the second-order Stokes result for a monochromatic wave in deep water. Real seas contain a spectrum of waves, and the drift of the spectrum is larger at the surface because of the short waves. Finite depth, breaking and wave–current interaction also change the result, and the formula applies to a depth greater than half a wavelength.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.