Skip to content
Omnikalc

Equivalent potential temperature calculator

Enter the air temperature, the dew point and the pressure to get the equivalent potential temperature θe by Bolton’s formula, the vapor pressure, the mixing ratio, the lifting condensation temperature and the dry potential temperature.

Updated on
Your inputs
°C

Value out of range

°C

Value out of range

hPa

Value out of range

Results

Equivalent potential temperature θe

336.44 K

Mixing ratio

13.10 g/kg

θe in degrees Celsius
63.29 °C
Dry potential temperature θ
298.15 K
Vapor pressure
20.63 hPa
Temperature at the lifting condensation level
16.37 °C
θe minus θ (latent heat contribution)
38.29 K

The equivalent potential temperature calculator gives θe from the air temperature, the dew point and the pressure with Bolton’s formula, together with the vapor pressure, the mixing ratio, the temperature at the lifting condensation level and the dry potential temperature.

How the calculation works

  • Enter the air temperature and the dew point in degrees Celsius.
  • Enter the pressure in hPa.
  • Read θe in kelvin and Celsius, with the mixing ratio and the LCL temperature.

Example

Air at 25 °C with a dew point of 18 °C and 1000 hPa hPa has a vapor pressure of 20.63 hPa and a mixing ratio of 13.10 g/kg. The lifting condensation level temperature is 16.37 °C, the dry potential temperature is 298.15 K, and the equivalent potential temperature is 336.44 K (63.29 °C), 38.29 K above θ.

Why it matters

The calculator helps meteorology students, storm chasers, pilots and forecasters who read soundings and weather maps, compare air masses, or judge the moisture and heat available for convection, and want θe without handling the empirical formula by hand.

Good to know

The dew point cannot exceed the temperature, otherwise the air would be supersaturated. The formula is an empirical fit valid for typical atmospheric conditions, with an error of about 0.3 K. The pressure is the pressure of the parcel. For comparing air masses, use the same reference level. The calculator does not include the effect of liquid water or ice already present in the parcel, so it applies to unsaturated or just saturated air. Always quote the formula used, since other approximations can differ by a kelvin or more.

The potential temperature calculator treats dry air, the mixing ratio calculator gives the humidity, the cloud base calculator estimates the condensation height and the thermal wind calculator relates temperature gradients to wind.

Frequently asked questions

What is the equivalent potential temperature?

The equivalent potential temperature θe is the temperature a parcel of air would reach if all its water vapor condensed, releasing latent heat, and it was then brought down to 1000 hPa. It combines temperature, humidity and pressure in a single conserved quantity for dry and moist adiabatic processes, so it labels air masses. Warm and humid air has a high θe.

How is it computed here?

The calculator uses the formula of Bolton (1980). It first gets the vapor pressure and mixing ratio from the dew point, then the temperature at the lifting condensation level T_L = 1 / [1 / (T_d − 56) + ln(T / T_d) / 800] + 56, then θe = T × (1000 / (p − e))^0.2854 × (T / T_L)^(0.00028 r) × exp[(3.036 / T_L − 0.00178) × r × (1 + 0.00048 r)].

What values are typical?

In dry polar air θe may be near 270 to 285 K, while in humid tropical air it exceeds 350 K. For 25 °C, a dew point of 18 °C and 1000 hPa, θe is about 336 K, which is 63 °C. A θe above 340 K is typical of the air feeding severe thunderstorms. A drop of θe with height signals convective instability.

Why is it useful for forecasting?

Because θe is conserved in moist adiabatic ascent, forecasters use it to trace air masses and to find fronts and dry lines, where the horizontal gradient of θe is strong. Its decrease with height indicates potential instability. Sounding diagrams and weather maps at 850 hPa often show θe to locate the warm, moist air that fuels storms.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.