Skip to content
Omnikalc

Thermal wind calculator

Enter the horizontal temperature gradient, the latitude, the two pressure levels and the mean temperature to get the Coriolis parameter, the thermal wind between the levels, the layer thickness and the shear per kilometer.

Updated on
Your inputs
K

Value out of range

°

Value out of range

hPa

Value out of range

hPa

Value out of range

K

Value out of range

Results

Thermal wind between the levels

19.29 m/s

Thickness of the layer

5,173 m

Coriolis parameter f
0.0001031 s⁻¹
Thermal wind in km/h
69.4 km/h
Wind shear per kilometer
3.73 m/s
Thickness change over 1000 km
203 m

The thermal wind calculator gives the change of the geostrophic wind between two pressure levels from the horizontal temperature gradient, the latitude, the mean temperature, the layer thickness and the shear per kilometer.

How the calculation works

  • Enter the temperature gradient per 100 km and the latitude.
  • Enter the lower and upper pressure levels and the mean temperature.
  • Read the thermal wind, the thickness and the shear.

Example

A gradient of 1 K per 100 km at latitude 45 °, where the Coriolis parameter is 0.0001031 s⁻¹, gives a thermal wind of 19.29 m/s (69.4 km/h) between 1000 hPa and 500 hPa hPa. The layer is 5,173 m thick and the shear is 3.73 m/s per kilometer. Thickness changes by 203 m over 1000 km.

Why it matters

The calculator helps meteorology students, pilots, forecasters and weather enthusiasts who study jet streams and fronts, want to relate the temperature contrast to the wind shear, or check textbook problems on the thermal wind relation.

Good to know

The relation holds in geostrophic and hydrostatic balance, so it is a good approximation at mid-latitudes away from the surface and from the equator. The latitude must be at least about 5 degrees, since the Coriolis parameter vanishes at the equator. The gradient is the magnitude of the temperature change across the flow, and the direction follows the rule that the wind blows with cold air on its left in the Northern Hemisphere. The result is the vector difference of the winds, not a single wind speed. Keep the layer thickness modest, because a very deep layer hides the real structure of the shear.

The geostrophic wind calculator gives the wind from the pressure gradient, the Coriolis effect calculator explains the deflection, the potential temperature calculator treats the thermodynamics and the Rossby number calculator tests the balance.

Frequently asked questions

What is the thermal wind?

The thermal wind is not a real wind but the difference between the geostrophic wind at two levels. When the temperature changes horizontally, the pressure surfaces tilt more at height than near the ground, so the geostrophic wind changes with height. Its magnitude is V_T = (R / f) × ln(p1 / p2) × |dT/dy|, where R = 287 J/(kg·K) and f is the Coriolis parameter.

What does a temperature gradient of 1 K per 100 km give?

At latitude 45 degrees, f is 1.03 × 10⁻⁴ per second. Between 1000 and 500 hPa, ln(2) is 0.693, so the thermal wind is about 19 m/s. That is why the strongest jet streams lie above the strongest horizontal temperature contrasts, the polar fronts, where a gradient of several K per 100 km gives winds above 50 m/s.

Why does the wind increase with height in the mid-latitudes?

In the Northern Hemisphere the air is warmer to the south, so the thermal wind blows with the cold air on its left, from the west. The westerly geostrophic wind therefore strengthens with height until the tropopause, which explains the westerly jet streams at 10 km. In the Southern Hemisphere the sense of rotation and the gradient directions are mirrored.

What is the layer thickness?

By the hypsometric equation, the thickness between two pressure levels is Δz = (R × T̄ / g) × ln(p1 / p2). For a mean temperature of 255 K between 1000 and 500 hPa, it is about 5170 m. Warm layers are thicker than cold layers, so the horizontal change of thickness is directly linked to the thermal wind.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.