Skip to content
Omnikalc

Fenske equation calculator: how many stages does a distillation need at the very least?

Enter the distillate and bottoms purity and the relative volatility to get the minimum number of theoretical stages at total reflux and a rough number of real stages.

Updated on
Your inputs
mol %

Value out of range

mol %

Value out of range

Value out of range

Results

Minimum number of theoretical stages at total reflux

6.43

Separation factor S
361
Rough number of actual theoretical stages (2 × minimum)
12.9
Minimum stages if α were 20 % lower
8.50

Every distillation column needs a certain number of stages, and there is a hard lower limit. The Fenske equation calculator takes the purity of the distillate, the content of the bottoms and the relative volatility, and gives the minimum number of theoretical stages at total reflux, the separation factor, a rough number of real theoretical stages and the effect of a lower relative volatility.

How the calculation works

  • Enter the mole percent of the light component wanted in the distillate and the amount allowed in the bottoms, and the average relative volatility α of the two components.
  • The calculator applies the Fenske equation for a column that runs at total reflux, with no product withdrawn: N_min = ln[(xD / (1 − xD)) × ((1 − xB) / xB)] / ln α.
  • The result is the minimum number of theoretical stages, including the partial reboiler. No column can do the separation with fewer stages, whatever the reflux.
  • As a rule of thumb, the real column needs about twice the minimum number of stages. It also shows how the result changes if the relative volatility is 20 % lower.

Example

A column must make a distillate of 95 mol % of the light component from a bottoms with 5 mol %, for a mixture with a relative volatility of 2.5. The separation factor is (95 / 5) × (95 / 5) = 361. The minimum number of stages is ln(361) / ln(2.5) = 6.43, and a real column would need about 12.9 theoretical stages. If α were 20 % lower, at 2.0, the minimum would rise to 8.5.

Why it matters

The minimum number of stages is the start of every shortcut design of a distillation column, and a quick check on a proposed design. It shows the strong effect of the relative volatility and of the purity: asking for more purity or working with a less volatile pair means many more stages and a taller, more costly column.

Good to know

The equation is for binary mixtures, or for the key components of a multicomponent mixture, with a constant relative volatility along the column and total reflux. The relative volatility varies with the composition and temperature, and for a non-ideal mixture it can vary strongly. The number is the minimum possible, and it is not the number for a real operation. The factor 2 is a rule of thumb.

The Raoult’s law calculator gives the vapour pressure of a mixture, the Antoine equation calculator gives the vapour pressure of a pure liquid, the boiling point elevation calculator covers solutions with a non-volatile solute, and the Clausius–Clapeyron calculator links vapour pressure to temperature.

Frequently asked questions

What is the Fenske equation?

It gives the minimum number of equilibrium stages that a distillation column needs to make a given separation, which happens when all of the overhead vapour is condensed and returned as reflux (total reflux). It was derived by Merrell Fenske in 1932. It is the first step of the shortcut design of columns, with the Underwood equation for the minimum reflux and the Gilliland correlation for the real stages.

What is the relative volatility?

It is the ratio of the volatilities of the two components, α = (y₁ / x₁) / (y₂ / x₂), where x and y are the liquid and the vapour mole fractions. A value of 1 means that the vapour and the liquid have the same composition and no separation is possible by distillation. The larger α is, the easier the separation. Ideal mixtures have α equal to the ratio of the vapour pressures.

Which value of α should I use?

α changes along the column because of the change in temperature, so use the geometric mean of the values at the top and the bottom, α = √(α_top × α_bottom). For ideal mixtures, α can be computed from the Antoine equation. For non-ideal mixtures, such as ethanol and water, the activity coefficients matter, and an azeotrope makes the separation impossible beyond its composition.

How do I go from the minimum stages to the real column?

Operating at total reflux gives no product. A real column runs at a reflux ratio of 1.1 to 1.5 times the minimum, and the Gilliland correlation gives the number of stages. As a quick guide, the number of theoretical stages is about twice the minimum. The real number of trays is larger, since each tray is only 50 to 80 % efficient.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.