A flywheel stores energy as rotation. It evens out the pulses of an engine, supplies a burst of power to a press, and in some grid and racing systems it acts as a battery. The energy depends on how much mass spins, how far from the axis the mass sits, and how fast it turns. This calculator gives the stored energy in joules and watt-hours, the specific energy, the rim speed and how long the energy can supply a load.
How the calculation works
- Moment of inertia I = k × m × r², with k = ½ for a solid disc and 1 for a thin ring
- Angular speed ω = rpm × 2π ÷ 60
- Energy E = ½ × I × ω²
- Rim speed = ω × r
- Time = energy ÷ load power
Example
A solid steel disc of 50 kg and 0.3 m radius spins at 3,000 rpm. Its moment of inertia is 2.25 kg·m² and its angular speed is 314.2 rad/s. The stored energy is 111,033 J, or 30.8 Wh, which is 0.62 Wh/kg. The rim speed is 94.2 m/s. A 500 W load would be supplied for about 3 minutes and 42 seconds.
Where it is used
Engines, presses, punches, gym equipment, toys and uninterruptible power supplies all use flywheels. In racing, kinetic energy recovery systems store braking energy in a small, fast rotor. Compared with a battery, a flywheel delivers and absorbs power very quickly and can be cycled millions of times, but the energy it holds is small for its weight.
Good to know
A spinning flywheel is dangerous: the rim stress rises with the square of the speed, and a failure releases a lot of energy. Real systems are enclosed, balanced and kept below the burst speed with a wide safety factor. Bearings, air drag and the generator or motor all lose some energy, so a real system returns less than the amount stored. Do not build a high-speed flywheel without proper engineering.
Related tools
For the moment of inertia of other shapes, use the moment of inertia calculator. The kinetic energy calculator covers moving masses, and the angular momentum calculator relates rotation to torque.