Skip to content
Omnikalc

Holding pattern timing calculator

Enter the true airspeed, the wind and its angle to the inbound course, and the inbound leg time to get the outbound leg time to fly, the leg length, the standard turn radius and the time for a full circuit.

Updated on
Your inputs
kt

Value out of range

kt

Value out of range

°

Value out of range

min

Value out of range

Results

Outbound leg time to fly

0.67 min

Time of a full circuit (two turns of 1 minute)

3.67 min

Ground speed on the inbound leg
97 kt
Ground speed on the outbound leg
143 kt
Length of the inbound leg
1.61 NM
Radius of a standard-rate turn
1.91 NM
Width of the racetrack (two turn radii)
3.82 NM

The holding pattern timing calculator gives the outbound leg time to fly in a hold so that the inbound leg keeps the same length in the wind, with the leg length, the standard turn radius and the time of a full circuit, from the airspeed, the wind and the inbound time.

How the calculation works

  • Enter the true airspeed, the wind speed and its angle to the inbound course.
  • Enter the inbound leg time wanted, 1 minute or 1.5 minutes.
  • Read the outbound time and the dimensions of the pattern.

Example

At 120 kt with a wind of 25 kt at 20 ° to the inbound course, the inbound ground speed is 97 kt and the outbound one 143 kt. An inbound leg of 1 min is 1.61 NM long, so the outbound leg should last 0.67 min. A full circuit takes 3.67 min. A standard turn has a radius of 1.91 NM, and the racetrack is 3.82 NM wide.

Why it matters

The calculator helps instrument pilots and students who have to fly a hold accurately, see how the wind changes the legs, plan the fuel used while holding, and understand why the outbound time is adjusted in strong wind.

Good to know

The method uses the headwind component along the inbound course, and it ignores the crosswind drift and the wind effect on the turns. Fly the pattern at or below the speed limit of the airspace, and start the outbound timing abeam the fix or at the wings level after the turn, according to the procedure. Pilots often use the wind correction by tripling the drift angle on the outbound leg. The figures are for training and planning, and air traffic control instructions always take priority.

The aircraft turn performance calculator treats the turn in detail, the wind triangle calculator gives the drift and the ground speed, the DME arc calculator handles arcs and the flight fuel planning calculator estimates the fuel.

Frequently asked questions

Why does the outbound time change with the wind?

The inbound leg is timed, usually 1 minute below 14,000 feet and 1.5 minutes above. With a headwind inbound, the inbound ground speed is low, so the leg is short; the same distance is flown outbound with a tailwind, so the aircraft needs less than the nominal time. The pilot adjusts the outbound time to keep the same leg length.

How is the outbound time calculated?

The inbound leg length is the inbound ground speed times the inbound time. The outbound time is that length divided by the outbound ground speed, which is the true airspeed plus the headwind component of the inbound leg. A headwind inbound of 20 knots at a true airspeed of 120 knots gives an outbound time of about 0.7 of the inbound time.

How long is a full circuit?

A full circuit is two turns of 180 degrees at standard rate, which take 1 minute each, plus the inbound and outbound legs. With 1 minute inbound and a matching outbound leg it is about 4 minutes in still air. The time grows with the inbound leg and shrinks when the headwind inbound shortens the outbound leg.

Does this replace the entry and wind correction?

No. It gives the timing only. A pilot also corrects the heading for drift on each leg, chooses the entry procedure (direct, teardrop or parallel) from the heading, and flies the speed limit of the pattern. The wind correction angles on the turns are not in this calculation.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.