Skip to content
Omnikalc

How much power can your stream produce?

Enter the water flow, the net head, the overall efficiency and how much of the year it runs: get the electrical power in kW, the energy per year, its value and the households it could supply.

Updated on
Your inputs

Value out of range

Value out of range

%

Value out of range

%

Value out of range

$ /kWh

Value out of range

kWh

Value out of range

Results

Electrical power

5.88 kW

Energy per year

46,389 kWh

Value of the energy per year
$5,567
Households supplied
4.4

A stream falling through a height holds energy that a turbine can convert into electricity. The power available depends on just two things: how much water flows, and how far it drops. This calculator estimates the electrical power of a small hydro installation from the flow, the net head and the overall efficiency, then converts it into yearly energy, money and the number of households it could supply.

How the calculation works

  • Power (W) = efficiency × 1,000 kg/m³ × 9.80665 m/s² × flow (m³/s) × head (m)
  • Energy per year = power in kW × 8,760 hours × share of the year running
  • Value = energy × price per kWh

Example

A stream with a flow of 50 L/s falling 20 m, with an overall efficiency of 60%, produces 0.6 × 1,000 × 9.80665 × 0.05 × 20 = 5.88 kW. If it runs 90% of the year, it generates about 46,400 kWh annually, worth $5,570 at $0.12 per kWh, enough for about 4.4 households using 10,500 kWh a year.

Flow and head

Head is the more valuable of the two: a high head needs less water and allows smaller, cheaper turbines. Flow varies with the seasons, so use a flow that is available most of the year and not the peak after rain. Measure the head with a level or a GPS, and estimate friction losses in the pipe, which increase with length and with smaller diameters.

Before you build

Check the water rights and environmental rules, since you may have to leave a minimum flow in the stream. Costs depend on the site, the length of the penstock and the grid connection. A dependable year-round flow makes micro-hydro very attractive, because it produces day and night, unlike solar and wind.

Frequently asked questions

What is the formula for hydropower?

Power = efficiency × water density × gravity × flow × head. A small stream can produce a few kilowatts if the drop is high enough.

What is head?

The vertical distance the water falls from the intake to the turbine. Pipe friction reduces it to the net head.

What efficiency should I use?

Small systems typically reach 50% to 70% overall; larger plants can exceed 85%.

Do I need permission?

Almost always. Taking water from a stream is regulated, so check the rules and any environmental requirements before building.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.