Skip to content
Omnikalc

Helicopter hover power calculator: how much power does it take to hover?

Enter the weight, rotor diameter, altitude and figure of merit to get the power needed to hover, the disc loading, the induced velocity and the power loading of a helicopter.

Updated on
Your inputs
lb

Value out of range

ft

Value out of range

ft

Value out of range

Value out of range

Results

Power required to hover

151.5 hp

Ideal (induced) power
106.0 hp
Disc loading
2.806 lb/ft²
Induced velocity through the rotor
24.30 ft/s
Power loading
15.85 lb/hp

How much power does it take to stay in the air without moving? The helicopter hover power calculator uses the momentum theory of the rotor to give the power required to hover, the ideal induced power, the disc loading, the induced velocity and the power loading, from the weight, the rotor diameter, the altitude and the figure of merit.

How the calculation works

  • Enter the gross weight, the rotor diameter, the altitude and the figure of merit of the rotor (0.6 to 0.8 for a good rotor).
  • In a hover, the thrust T of the rotor equals the weight. The calculator finds the air density at the altitude and the disc area A of the rotor.
  • From the momentum theory, the induced velocity is v_i = √(T / (2 ρ A)), and the ideal power is P = T v_i.
  • The power required is the ideal power divided by the figure of merit. The result also gives the disc loading T/A and the power loading.

Example

A light helicopter of 2,400 lb with a rotor of 33 ft (disc area 855 ft²) hovers at sea level. The disc loading is 2.806 lb/ft², and the air is accelerated at 24.30 ft/s through the rotor. The ideal power is 106.0 hp, and with a figure of merit of 0.7 the power required is 151.5 hp, a power loading of 15.85 lb/hp.

Why it matters

Hover is the most demanding flight condition of a helicopter, and the power in a hover sets the engine size, the useful load and the altitude limit. The calculator helps compare designs, understand the effect of disc loading and altitude, and estimate if a given helicopter can hover in given conditions.

Good to know

The calculator uses the simple momentum theory with a constant figure of merit, a standard-atmosphere density that depends only on the altitude (not on the temperature) and a hover out of ground effect. The real power also depends on the blade design, the tip speed, the ground effect (which reduces the power near the ground) and the tail rotor, which takes 5 to 10 % of the total power and is not included here. The result is an estimate for planning, not for flight operations, for which the flight manual applies.

The lift force calculator gives the lift of a wing, the wing loading calculator is the fixed-wing counterpart of the disc loading, the true airspeed calculator converts the airspeed, and the density altitude calculator shows the effect of heat and altitude on performance.

Frequently asked questions

How does a rotor lift a helicopter?

The rotor pushes air downward, and by Newton’s third law the air pushes the helicopter up. In a hover, the thrust equals the weight. The momentum theory treats the rotor as a disc that gives a downward velocity, the induced velocity, to the air that crosses it, and it gives the minimum power needed for a given thrust.

What is disc loading and why does it matter?

It is the weight carried by each unit of rotor disc area, T/A. A low disc loading, as on a helicopter with a large rotor, needs a low induced velocity and so less power in a hover. A high loading, as on a tilt-rotor or a fighter-like design, needs much more power. The ideal power goes as the square root of the disc loading.

What is the figure of merit?

It is the ratio of the ideal power, from the momentum theory, to the real power, and so a measure of the efficiency of the rotor in a hover. It is 0.6 to 0.8 for a good rotor: the losses come from the swirl of the wake, the non-uniform flow through the disc, the drag of the blades and the tip losses. A value of 1 would be perfect.

Why does a helicopter need more power at altitude or on a hot day?

The air density falls with altitude and rises when the air is cold. In a hover, the power needed grows as 1/√ρ, so at 8,000 ft the power required is about 13 % higher than at sea level, while the engine delivers less. This is why a helicopter that can hover at sea level cannot always do so in the mountains in summer.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.