Skip to content
Omnikalc

Joint torque and muscle force calculator (biomechanics)

Enter the load held in the hand and its distance from the joint, the mass of the limb segment and its center of mass, the moment arm of the muscle and the angle of its pull to get the joint torque, the muscle force and the mechanical advantage.

Updated on
Your inputs
kg

Value out of range

m

Value out of range

kg

Value out of range

m

Value out of range

cm

Value out of range

°

Value out of range

Results

Total joint torque

31.6 N·m

A moderate joint torque, typical of a resistance exercise
Torque of the held load
29.4 N·m
Torque of the segment weight
2.21 N·m
Muscle force required
791 N
Muscle force in kilogram-force
81 kgf
Mechanical advantage of the muscle (moment arm / load distance)
0.133
Under 1: the muscle works at a mechanical disadvantage, as most muscles do

The joint torque and muscle force calculator gives the joint torque, the muscle force and the mechanical advantage of a simple lever model of the elbow from the load, the segment weight, the moment arm and the pull angle.

How the calculation works

  • Enter the load held and its distance from the joint.
  • Enter the segment mass and its center of mass.
  • Enter the moment arm and the angle, then read the torque and the muscle force.

Example

Holding 10 kg at 0.30 m gives a load torque of 10 × 9.81 × 0.30 = 29.4 N·m. The forearm of 1.5 kg with its center of mass at 0.15 m adds 2.21 N·m, so the joint torque is 31.6 N·m. With a moment arm of 4 cm and a pull at 90°, the muscle force is 31.6 / 0.04 = 791 N, which is 81 kgf, a mechanical advantage of 0.133.

Why it matters

The calculator helps students in kinesiology, physiotherapy and ergonomics, strength coaches and teachers who want to show how a small muscle moment arm leads to large forces in muscles and joints.

Good to know

This is a static two-dimensional model: it assumes that the forearm is held still, with one muscle group providing the whole torque and the load hanging vertically at the given horizontal distance. In reality several muscles work together, such as the biceps, the brachialis and the brachioradialis, which share the force, and the moment arm changes with the joint angle. Movements that accelerate the load add the inertial torque, so a fast lift needs much more force than a slow one. The model also ignores the joint reaction force, which adds to the muscle force and loads the cartilage. Body segment masses and centers of mass come from anthropometric tables, where the forearm and hand are about 2.2 percent of the body mass for men, and the center of mass lies at about 60 percent of the forearm length from the elbow. Use the calculator for teaching and for order of magnitude estimates, not for clinical decisions.

The vertical jump calculator treats the power of the legs, the Jackson-Pollock calculator estimates body fat, the lean body mass calculator gives the muscular part of the weight and the dunk calculator treats the jump to the rim.

Frequently asked questions

What is a joint torque?

It is the rotational effect of the forces about the joint: force multiplied by the perpendicular distance to the joint. For a load held in the hand, torque = mass × 9.81 × horizontal distance. The muscles must produce a torque equal and opposite to hold the position.

Why is the muscle force so large?

Muscles attach close to the joint, with a moment arm of 2 to 5 cm, while the load is 20 to 40 cm away. The muscle force is therefore 5 to 10 times the weight held, which explains the loads on tendons and why small changes in grip distance matter.

Why does the angle matter?

Only the component of the muscle force perpendicular to the bone produces torque, so the effective moment arm is the moment arm multiplied by the sine of the angle. At a small angle the same torque needs a much larger muscle force.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.