Skip to content
Omnikalc

Joule–Thomson effect calculator: how much does a gas cool when it expands?

Choose a gas and enter the temperature and the pressure before and after the valve to estimate the temperature change of the expansion.

Updated on
Your inputs
°F

Value out of range

psia

Value out of range

psia

Value out of range

Results

Temperature after the expansion

38.1 °F

Temperature change
-38.9 °F
Cooling: the gas is below its inversion temperature
Joule–Thomson coefficient used
1.10 K/bar
Pressure drop
285.3 psi

When a real gas goes through a valve from a high to a low pressure, its temperature changes. This Joule–Thomson effect calculator estimates that change for six gases from the pressure before, the pressure after and the starting temperature, and it gives the final temperature, the temperature change and the coefficient used.

How the calculation works

  • Choose the gas and enter the temperature and pressure before the valve and the pressure after it.
  • For a throttling process, the enthalpy stays constant, and the temperature changes by ΔT = μ × ΔP, where μ is the Joule–Thomson coefficient.
  • The calculator uses typical values of μ near room temperature, in K per bar.
  • A negative ΔT is cooling, and a positive ΔT is heating. The result is an estimate for a modest pressure range.

Example

Carbon dioxide at 77 °F and 300 psia is throttled to 14.7 psia. The pressure drop is 285.3 psi, or 19.67 bar. With μ = 1.10 K/bar, the temperature falls by 21.6 K, which is 38.9 °F, and the gas leaves at about 38.1 °F.

Why it matters

The effect explains why a gas cylinder frosts when it is opened fast, why a pressure regulator can freeze in cold weather and why a leak of high-pressure CO₂ can make dry ice. It is also the working principle of many refrigeration and gas liquefaction systems, so engineers need a quick estimate of the cooling of a throttle.

Good to know

The calculator uses a constant coefficient for each gas at about 300 K, taken from tables of typical values. It does not follow the change of μ with pressure and temperature, and it ignores heat exchange with the walls, phase change (such as dry ice from CO₂) and the kinetic energy of the jet. For a precise value, integrate μ along the path with an equation of state or use the property tables of the gas.

The ideal gas calculator gives the case in which there is no effect, the van der Waals calculator is the simple model that explains it, the Carnot efficiency calculator covers the limits of refrigeration, and the heat loss calculator covers heat exchange with the surroundings.

Frequently asked questions

What is the Joule–Thomson effect?

It is the change of temperature of a real gas when it is forced through a valve, a porous plug or a nozzle from a high to a low pressure without heat exchange. The process keeps the enthalpy constant. For an ideal gas, there is no temperature change, so the effect comes from the forces between the molecules.

Why do some gases heat up?

Each gas has an inversion temperature above which the expansion heats it. For nitrogen and air, it is far above room temperature (about 620 K and 650 K), so they cool. For hydrogen (about 200 K) and helium (about 40 K), room temperature is above it, so they warm on expansion, which is a safety point for leaks of hydrogen.

How is the effect used in industry?

It is the base of the Linde cycle for the liquefaction of air and other gases, in which a compressed gas is cooled by a heat exchanger, expanded and cooled more with each pass. It also explains the cold on the outlet of a CO₂ fire extinguisher, the frost on a regulator and the formation of dry ice.

How accurate is a fixed coefficient?

The coefficient varies with temperature and pressure, and it drops at high pressure and with a higher temperature. Using a single value near room temperature is fine for a drop of a few bar. For a large drop, such as from 300 psia to atmospheric pressure, the real change can differ by 20 to 30 %, so treat the result as an estimate.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.