Skip to content
Omnikalc

Does a gas behave as a continuous fluid at this scale?

Choose a gas, a pressure, a temperature and a characteristic length: get the mean free path, the Knudsen number and the flow regime.

Updated on
Your inputs

Value out of range

°C

Value out of range

Value out of range

Results

Knudsen number

0.657

Kn from 0.1 to 10: transitional flow, kinetic methods such as DSMC are needed
Mean free path
0.0657 µm
Mean free path
65.7 nm

At everyday scale, air behaves like a smooth continuous fluid. But air is made of molecules that fly in straight lines until they collide. When the container is so small, or the pressure so low, that molecules hit the walls more often than each other, the continuum picture fails. The Knudsen number measures this: it is the mean free path divided by the size of the system. This calculator gives the mean free path of a gas and the flow regime.

How the calculation works

  • Mean free path λ = kB × T ÷ (√2 × π × d² × p)
  • Knudsen number Kn = λ ÷ L
  • kB = 1.380649 × 10⁻²³ J/K, T in kelvin, p in pascals, d the effective molecular diameter
  • Regimes: continuum (Kn < 0.01), slip (0.01 to 0.1), transitional (0.1 to 10), free molecular (above 10)

Example

Air at 1 atm and 20 °C has a mean free path of about 66 nm (using an effective diameter of 3.7 Å). In a channel 100 nm wide, the Knudsen number is about 0.66, in the transitional regime. In a vacuum chamber at 10 Pa with a characteristic length of 5 cm, the mean free path is 0.66 mm and Kn is about 0.013, so the flow is in the slip regime.

Why it matters

Designers of micro- and nanoscale devices, vacuum systems and space vehicles use the Knudsen number to choose their models. A continuum solver gives wrong answers in the transitional and free molecular regimes, where kinetic methods are needed. It also explains why gases leak through nanopores faster than expected and why thin films conduct heat less well.

Good to know

The molecular diameter is an effective value, taken from viscosity, and sources differ by a few percent. The formula assumes an ideal gas, so it is poor at very high pressure. For a mixture such as air, an average diameter is used. The characteristic length depends on the problem: channel height, pipe diameter, particle size or boundary layer thickness.

The Reynolds number calculator covers the other key dimensionless number for flow, the ideal gas law calculator links pressure, volume and temperature, and the gas molecule speed calculator gives how fast the molecules move.

Frequently asked questions

What is the Knudsen number?

The ratio between the mean free path of the molecules, the average distance they travel between collisions, and a characteristic length of the system: Kn = λ ÷ L. It tells whether a gas behaves as a continuous fluid.

What is the mean free path?

λ = kB × T ÷ (√2 × π × d² × p), where d is the molecular diameter and p the pressure. In air at sea level and 20 °C it is about 66 nanometres; it grows as the pressure falls.

Which regimes does it define?

Below 0.01 the flow is continuous; from 0.01 to 0.1 there is slip at the walls; from 0.1 to 10 the flow is transitional; above 10 it is free molecular. These limits are conventions, not sharp transitions.

Where does it matter?

In vacuum technology, microfluidics and MEMS, high-altitude and spacecraft aerodynamics, aerosol science and nanoporous materials. Anywhere the gas gaps are of the same order as the mean free path.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.