Skip to content
Omnikalc

Péclet number calculator: does the flow or diffusion do the transport?

Enter the flow speed, a length, the diffusivity and the viscosity to get the Péclet number, the Reynolds number, the Prandtl or Schmidt number and the diffusion and advection times.

Updated on
Your inputs
ft/s

Value out of range

in

Value out of range

mm²/s

Value out of range

mm²/s

Value out of range

Results

Péclet number

27,070

Advection dominates: the transport is by the flow, with thin boundary layers
Reynolds number
3,871.0
Prandtl or Schmidt number ν ÷ D
6.99
Time to diffuse across the length
1:15:12
Time to be carried across the length
0:00

Heat and substances are moved both by the flow of the fluid and by diffusion. The Péclet number calculator compares the two. Enter the flow speed, a length, the diffusivity and the viscosity and get the Péclet number, the Reynolds number, the Prandtl or Schmidt number and the times needed to diffuse and to be carried across the length.

How the calculation works

  • Enter the flow speed, the characteristic length, the diffusivity (thermal diffusivity for heat, mass diffusivity for a species) and the kinematic viscosity of the fluid.
  • The Péclet number is Pe = U L / D, the ratio of transport by the flow (advection) to transport by diffusion.
  • It is also the product Pe = Re × Pr for heat, or Re × Sc for mass, so the calculator gives the Reynolds number and the ratio ν / D.
  • The two times show the idea: the time to diffuse over the length, L² / D, and the time for the flow to carry across, L / U.

Example

Water flows at 0.5 ft/s (0.152 m/s) in a pipe 1 in wide. With a thermal diffusivity of 0.143 mm²/s and a viscosity of 1.0 mm²/s, the Péclet number is 27,070. The Reynolds number is 3,871 and the Prandtl number is 7.0. Heat diffuses across the pipe in about 75 min, while the flow carries a fluid element across in 0.17 s, so the heat transport is dominated by advection.

Why it matters

The Péclet number tells if a transport problem is controlled by the flow or by diffusion. It is used in heat exchangers, chemical reactors, groundwater and pollutant transport, microfluidics, biology, and in numerical simulation, where it decides how a scheme must be built.

Good to know

The number depends on the length you choose, such as a pipe diameter, a channel width or a plate length, so state the length with the result. The calculator takes a single diffusivity, which must match the quantity: thermal diffusivity for heat or the diffusion coefficient for a species. The properties vary with temperature, and in turbulent flow the effective diffusivity is much larger than the molecular value, so the molecular Péclet number overestimates the role of advection.

The Reynolds number calculator covers the ratio of inertia to viscosity, the Prandtl number calculator covers the ratio of momentum to heat diffusion, the diffusion coefficient calculator gives D, and the Nusselt number calculator covers the resulting heat transfer.

Frequently asked questions

What is the Péclet number?

It is Pe = U L / D, the ratio between the rate of transport by the bulk motion of the fluid and the rate of transport by diffusion. It is the key number of convection–diffusion problems, for heat (thermal Péclet number with the thermal diffusivity α) and for mass (mass Péclet number with the diffusion coefficient D).

How is it related to Reynolds and Prandtl numbers?

For heat, Pe = Re × Pr, where Pr = ν / α, and for mass Pe = Re × Sc, where Sc = ν / D. A liquid with a large Prandtl or Schmidt number, such as oil or a dissolved gas in water, has a large Péclet number even in slow laminar flow, so the transport is almost entirely by the flow.

What does a high Péclet number mean for modeling?

Diffusion is negligible in the bulk, and it matters only in thin boundary layers and at sharp fronts. Numerical methods then suffer from numerical diffusion and oscillations unless they use upwind schemes or a fine mesh. The cell Péclet number of a mesh, with the cell size as the length, is a standard check.

When is Pe small?

In slow flows, in tiny channels (microfluidics), in porous media, in tissues, and for fast-diffusing quantities such as heat in a metal. Then mixing happens by diffusion across the channel, and the mixing time scales with L² / D. This is why mixing in a microchannel needs a special design.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.