Skip to content
Omnikalc

Schmidt number calculator: how momentum and mass diffuse in a fluid

Choose a pair of substances or enter the kinematic viscosity and mass diffusivity to get the Schmidt number, the boundary layer ratio and the mass transfer coefficient on a flat plate.

Updated on
Your inputs
× 10⁻⁶ m²/s

Value out of range

× 10⁻⁶ m²/s

Value out of range

Value out of range

m

Value out of range

Results

Schmidt number

0.6118

Gas-like: momentum and mass diffuse at a similar rate
Ratio of velocity to concentration boundary layer thickness
0.8489
Average Sherwood number (laminar flat plate)
56.37
Mass transfer coefficient
14.37 mm/s

The Schmidt number tells how a substance spreads in a moving fluid. The Schmidt number calculator divides the kinematic viscosity by the mass diffusivity for six pairs of substances, or for your own values, and uses it with the Reynolds number to estimate the Sherwood number and the mass transfer coefficient on a plate.

How the calculation works

  • Choose a pair of substances (for example water vapor in air), or choose custom values and enter the kinematic viscosity ν and the mass diffusivity D.
  • The Schmidt number is the ratio of the two: Sc = ν / D. It plays for mass transfer the role of the Prandtl number for heat transfer.
  • Enter the Reynolds number of the flow and the length of the plate to estimate the Sherwood number with the laminar flat-plate correlation Sh = 0.664 Re^½ Sc^⅓.
  • The mass transfer coefficient follows from k = Sh D / L.

Example

Water vapor in air at 25 °C has ν = 15.6 × 10⁻⁶ m²/s and D = 25.5 × 10⁻⁶ m²/s, so Sc = 0.612. For a flow at Re = 10,000 along a plate 0.1 m long, the Sherwood number is 0.664 × 100 × 0.612^⅓ = 56.37, and the mass transfer coefficient is 14.37 mm/s.

Why it matters

The Schmidt number is the key dimensionless number of mass transfer. It is used in the design of absorbers, humidifiers, dryers, membranes and bioreactors, in the study of evaporation from a surface, and in environmental engineering for the exchange of gases between air and water.

Good to know

The diffusivities are rounded values at 25 °C and 1 atm for dilute mixtures, and the viscosities are those of the carrier fluid, air or water. They change with temperature and pressure. The Sherwood correlation is for the average over a smooth flat plate with a laminar boundary layer, valid for Reynolds numbers below about 500,000 and Schmidt numbers above 0.6, and it neglects the effect of a high transfer rate on the flow. For another shape or a turbulent flow, use the right correlation.

The Sherwood number calculator gives the mass transfer coefficient from other correlations, the Prandtl number calculator is the heat transfer counterpart, the Reynolds number calculator gives the flow regime, and the Knudsen number calculator covers the limit of continuum flow.

Frequently asked questions

What is the Schmidt number?

It is the ratio of the kinematic viscosity to the mass diffusivity, Sc = ν / D. It compares how fast momentum diffuses in a fluid (viscosity) with how fast a substance diffuses. It is the mass transfer counterpart of the Prandtl number. It is named after Ernst Schmidt, a German engineer who worked on heat and mass transfer.

What are typical values?

For gases, Sc is of order 1: about 0.6 for water vapor in air and 1 for carbon dioxide in air. For liquids, it is of order 100 to 1,000 or more, because molecules diffuse very slowly in a liquid: about 430 for oxygen in water and 550 for salt in water. For large molecules and polymers, Sc can reach 10⁵ or more.

How does it enter in mass transfer correlations?

Mass transfer correlations are written Sh = f(Re, Sc), just as heat transfer ones are written Nu = f(Re, Pr). For a laminar flow over a flat plate, Sh = 0.664 Re^½ Sc^⅓, valid for Sc above about 0.6. For a turbulent flow in a pipe, the Chilton–Colburn analogy gives Sh = 0.023 Re^0.83 Sc^⅓.

Why is the concentration boundary layer thin in a liquid?

The ratio of the thickness of the velocity boundary layer to that of the concentration one is about Sc^⅓. With Sc = 425 for oxygen in water, the ratio is 7.5, so the concentration layer is a fraction of the velocity layer. The gradient is then steep, which gives a high local flux, but the layer is thin and sensitive to the flow.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.