Skip to content
Omnikalc

Monod growth kinetics calculator

Enter the maximum growth rate, the half-saturation constant, the substrate concentration, the yield, the dilution rate and the feed concentration to get the specific growth rate, the doubling time, the chemostat steady state and the washout rate.

Updated on
Your inputs

Value out of range

mg/L

Value out of range

mg/L

Value out of range

Value out of range

Value out of range

mg/L

Value out of range

Results

Specific growth rate μ (per hour)

0.3571

Doubling time (hours)

1.94

Steady-state cell concentration X*

7.467 mg/L

Share of the maximum rate
71.4 %
Specific substrate uptake rate (per hour)
0.8929
Steady-state substrate S* in the chemostat
1.333 mg/L
Critical dilution rate (washout, per hour)
0.4545
Cell productivity D × X* (mg/L per hour)
1.493

The Monod growth kinetics calculator gives the specific growth rate of a culture limited by one nutrient, the doubling time, the chemostat steady state and the critical dilution rate at which the culture washes out, from μmax, Ks, the substrate concentration, the yield and the dilution rate.

How the calculation works

  • Enter μmax, Ks and the substrate concentration S.
  • Enter the yield Y, the dilution rate D and the feed concentration S0.
  • Read the growth rate, the doubling time and the chemostat values.

Example

With μmax = 0.5, Ks = 2 mg/L and a substrate of 5 mg/L, the culture grows at 0.3571 per hour, which is 71.4 % of the maximum, with a doubling time of 1.94 hours. In a chemostat at a dilution rate of 0.2, the substrate settles at 1.333 mg/L, the cells at 7.467 mg/L, and the washout rate is 0.4545 per hour.

Why it matters

The calculator helps microbiology and bioprocess students, fermentation engineers and wastewater technicians who model the growth of bacteria, yeast or algae, size a chemostat or a continuous bioreactor, or estimate how close a dilution rate is to washout.

Good to know

The chemostat equations apply only when the dilution rate is below μmax, and the calculator keeps the steady-state values safe near that limit. The Monod model describes one limiting nutrient and ignores inhibition, death and maintenance, so real cultures deviate at very high or very low concentrations. Use the same time unit for all rates, here per hour, and the same mass unit for the concentrations. The parameters should come from experiments with your organism and medium.

The bacterial growth calculator treats exponential growth, the Michaelis-Menten calculator has the same saturating form, the logistic growth calculator adds a carrying capacity and the exponential growth calculator treats unlimited growth.

Frequently asked questions

What is the Monod equation?

The Monod equation, proposed by Jacques Monod in 1949, describes the growth of microorganisms limited by one nutrient: μ = μmax × S / (Ks + S). The specific growth rate μ rises with the substrate concentration S and saturates at μmax. Ks is the concentration at which the rate is half of the maximum. It has the same form as the Michaelis-Menten equation.

What is a chemostat?

A chemostat is a culture vessel fed at a constant rate with fresh medium while the culture is removed at the same rate. At steady state, the growth rate equals the dilution rate D. This gives S* = Ks × D / (μmax − D) and X* = Y × (S0 − S*), so the experimenter controls the growth rate with the pump.

What is washout?

If the dilution rate exceeds the critical value D_c = μmax × S0 / (Ks + S0), cells are removed faster than they can grow and the culture washes out. With μmax = 0.5, Ks = 2 and S0 = 20, the critical value is about 0.4545 per hour. A dilution rate of 0.2 stays well below it and keeps the culture alive.

How is the yield defined?

The yield Y is the mass of cells produced per mass of substrate consumed. It turns the substrate consumption into the cell concentration. With Y = 0.4, a feed of 20 mg/L and a residual substrate of 1.33 mg/L, the culture reaches about 7.47 mg/L of cells. Yield changes with the growth rate in real cultures, so it is a simplification.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.