Skip to content
Omnikalc

Normal shock calculator: the jump in a supersonic flow across a shock wave

Enter the upstream Mach number, γ, pressure and temperature to get the Mach number after a normal shock, the ratios of pressure, density, temperature and total pressure, and the downstream state.

Updated on
Your inputs

Value out of range

Value out of range

psi

Value out of range

°F

Value out of range

Results

Mach number after the shock

0.5774

Pressure ratio p₂/p₁
4.5000
Density ratio ρ₂/ρ₁
2.6667
Temperature ratio T₂/T₁
1.6875
Total pressure ratio p₀₂/p₀₁
0.7209
Static pressure after the shock
66.15 psi
Static temperature after the shock
415.6 °F

Across a shock wave, a supersonic flow changes state in an instant. The normal shock calculator applies the Rankine–Hugoniot relations to give the Mach number after the shock, the ratios of pressure, density, temperature and total pressure, and the downstream pressure and temperature for a gas with a given γ.

How the calculation works

  • Enter the Mach number before the shock (it must be at least 1), the ratio of specific heats γ (1.4 for air) and the pressure and temperature upstream.
  • A normal shock is a thin surface perpendicular to the flow across which a supersonic flow becomes subsonic. The Rankine–Hugoniot relations give the jump.
  • The pressure ratio is p₂/p₁ = 1 + 2γ/(γ+1) (M₁² − 1) and the density ratio is ρ₂/ρ₁ = (γ+1) M₁² / ((γ−1) M₁² + 2).
  • The calculator gives the Mach number after the shock, the ratios of pressure, density, temperature and total pressure, and the downstream pressure and temperature.

Example

Air at Mach 2, at 14.7 psi and 59 °F (288.15 K), crosses a normal shock. The Mach number drops to 0.5774. The static pressure is multiplied by 4.5, to 66.15 psi, the density by 2.667 and the temperature by 1.6875, to 415.6 °F. The total pressure falls to 72.09 % of its upstream value.

Why it matters

Normal shock relations are central to supersonic aerodynamics. They are used for the inlets and nozzles of jet engines, the flow in front of a blunt re-entry capsule, the Pitot tubes of supersonic aircraft and the design of wind tunnels, and they are the starting point for the oblique shock relations.

Good to know

The calculator assumes a steady, one-dimensional shock in a calorically perfect gas, with a constant ratio of specific heats and no chemical reaction. At high Mach numbers (above about 5 in air), the temperature behind the shock is so high that the gas dissociates and ionizes, γ is no longer constant and the real jump is smaller than the one computed. The upstream state is the static state, not the total one, and the shock is assumed to be perpendicular to the flow.

The Mach number calculator gives the Mach number from speed and temperature, the isentropic flow calculator covers the smooth changes in a nozzle, the speed of sound calculator gives the speed that sets the Mach number, and the Pitot tube calculator links a pressure reading to the speed of the flow.

Frequently asked questions

What is a normal shock?

It is a very thin region, a few mean free paths thick, perpendicular to the flow, across which a supersonic flow is brought to subsonic speed. The pressure, density and temperature rise abruptly, while the velocity falls. It forms in front of a blunt body at supersonic speed, in a nozzle with a high back pressure, and in the inlet of a jet engine.

Why is the flow always subsonic after the shock?

The conservation of mass, momentum and energy across the shock gives only one solution with a rise in entropy, which is the one where the Mach number falls below 1. For Mach 1 the shock has no strength, and for a very high M₁ the Mach number after the shock tends to a limit of √((γ−1)/(2γ)), which is 0.378 for air.

Why does the total pressure fall?

A shock is irreversible: it increases the entropy and part of the useful energy is lost as heat. The stagnation (total) pressure falls, by 28 % at Mach 2 and by 94 % at Mach 5 in air. This loss of total pressure is what limits the efficiency of supersonic inlets, and why designers prefer several weak oblique shocks to a single strong normal one.

What is the shock used to measure?

A Pitot tube in a supersonic flow has a normal shock in front of it, so the pressure it reads is the total pressure after the shock. The Rayleigh Pitot formula links this pressure to the Mach number upstream, and the relations of this calculator are the basis of it.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.