Skip to content
Omnikalc

Froude number calculator: is your flow subcritical, critical or supercritical?

Enter the velocity and the hydraulic depth to get the Froude number, the wave speed, the critical depth and the specific energy of an open channel flow.

Updated on
Your inputs
ft/s

Value out of range

ft

Value out of range

ft/s²

Value out of range

Results

Froude number

0.669

Subcritical flow: slow and deep, waves can travel upstream
Speed of a small surface wave
8.969 ft/s
Critical depth for the same flow (rectangular channel)
1.912 ft
Specific energy of the flow
3.059 ft
Flow per unit width
15.000 ft²/s

The Froude number tells you whether water in a channel flows gently or fast. The Froude number calculator takes the flow velocity, the hydraulic depth and the gravitational acceleration, and gives the Froude number with the flow regime, the speed of a surface wave, the critical depth, the specific energy and the flow per unit width.

How the calculation works

  • Enter the flow velocity and the hydraulic depth, which is the flow area divided by the width of the water surface. For a wide rectangular channel it is simply the water depth.
  • The Froude number compares the flow velocity with the speed of a small surface wave: Fr = v ÷ √(g × y).
  • If Fr is below 1 the flow is subcritical (slow and deep), if it is about 1 it is critical, and if it is above 1 it is supercritical (fast and shallow).
  • The calculator also gives the wave speed, the critical depth for the same flow per unit width, and the specific energy of the flow.

Example

Water flows at 6 ft/s in a channel with a hydraulic depth of 2.5 ft. A surface wave travels at √(32.174 × 2.5) = 8.97 ft/s, so Fr = 6 ÷ 8.97 = 0.669. The flow is subcritical. The flow per unit width is 6 × 2.5 = 15 ft²/s, the critical depth is 1.912 ft and the specific energy is 3.059 ft.

Why it matters

Civil and hydraulic engineers use the Froude number to design channels, culverts, spillways and stilling basins. Knowing the regime shows where a hydraulic jump may form, which controls erosion and energy loss.

Good to know

The critical depth shown assumes a rectangular channel and a uniform velocity across the section. Real channels have uneven velocity, roughness and shape, so use the result as a first check and refer to a hydraulic analysis for a design.

The Reynolds number calculator tells whether the flow is laminar or turbulent, and the hydraulic jump calculator finds the depths on both sides of a jump.

Frequently asked questions

What is the Froude number?

It is a dimensionless number that compares the velocity of a flow with the speed at which a small wave moves on its surface. In an open channel, Fr = v ÷ √(g × y), where y is the hydraulic depth. It is named after the English engineer William Froude.

What do subcritical, critical and supercritical mean?

In subcritical flow (Fr below 1) waves can move upstream, so downstream conditions control the flow. In critical flow (Fr near 1) the waves stand still. In supercritical flow (Fr above 1) the water is faster than a wave, so upstream conditions control the flow, and a hydraulic jump can form where it slows.

What is the hydraulic depth?

It is the cross-sectional area of the flow divided by the width of the water surface. For a wide rectangular channel it equals the depth of the water. For a trapezoidal or circular channel, compute the area and the top width first and divide them.

Where else is the Froude number used?

Naval architects use it to compare the wave making of ships and models, and it also appears in the study of spillways, weirs, rivers and even crowds of people. Models tested at the same Froude number reproduce the effect of gravity waves.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.