Skip to content
Omnikalc

Sediment core age calculator: how old is the mud at a given depth?

Enter the depth in a core, the sedimentation rate and the dry density to get the age at that depth, the year of deposition, the mass accumulation rate and the time covered by each slice.

Updated on
Your inputs
cm

Value out of range

Value out of range

g/cm³

Value out of range

Value out of range

Results

Age of the sediment at that depth

800 years

Calendar year of deposition

1,225

Mass accumulation rate
0.090 g/cm²/yr
Time covered by a 1 cm slice
6.7 years
Sediment deposited per century
15.0 cm
Sedimentation rate in cm per thousand years
150 cm/kyr

Lakes, bogs and ocean floors keep a layered record of the past. If you know the sedimentation rate, a depth in a core can be converted into an age. This calculator gives the age at depth, the year of deposition, the mass accumulation rate and the time covered by each centimetre, which sets the time resolution of the record. It is a first-order tool, widely used before better age models are built from lead-210 or radiocarbon dates.

How the calculation works

  • Age = depth ÷ sedimentation rate (depth in mm, rate in mm per year)
  • Year of deposition = year of coring − age
  • Mass accumulation rate = sedimentation rate × dry bulk density, in g per cm² per year
  • Time per centimetre = 10 ÷ rate in mm per year
  • 1 mm per year equals 0.1 cm per year and 100 cm per thousand years

Example

In a lake core, mud is accumulating at 1.5 mm per year. A layer at 120 cm is 800 years old, which means it was deposited around the year 1225 if the core was taken in 2025. Each centimetre of the core covers 6.7 years, and 15.0 cm of mud is added each century. With a dry bulk density of 0.6 g/cm³, the mass accumulation rate is 0.090 g per cm² per year. The rate is also 150 cm per thousand years, the unit used for ocean cores.

Why it matters

Age models turn a core into a time series: pollen, pollutants, charcoal, diatoms or isotopes can be placed in history. The resolution tells you whether you can see a drought of 50 years or a single flood. The mass accumulation rate removes the effect of compaction and allows you to compare cores of different densities, and to follow changes of erosion or productivity over time.

Good to know

A constant sedimentation rate is a simplification. Rates change with climate, land use and compaction: deeper layers are denser, so their thickness per year is smaller than at the surface. For the last 150 years, lead-210 and cesium-137 give far better ages. For older layers, radiocarbon on plant remains is the standard. Turbidites, slumps and gaps break the continuity of a record. Ocean cores have much lower rates, from 0.1 to 10 cm per thousand years in the deep sea.

In practice

Use the tool to plan how thick slices to cut for a target resolution, or to compare two cores. Always validate the age model with at least a few dates. This tool is for first estimates.

Frequently asked questions

How do you calculate the age of a sediment core?

Divide the depth by the sedimentation rate. For example, 120 cm at 1.5 mm per year is 1200 mm ÷ 1.5 = 800 years.

What is a typical sedimentation rate?

Lakes accumulate from a fraction of a millimetre to several millimetres a year. The deep ocean is slower, often 1 to 10 cm per thousand years, which is 0.01 to 0.1 mm per year.

What is the mass accumulation rate?

It is the mass of dry sediment deposited per unit area and time, equal to the sedimentation rate times the dry bulk density. It does not depend on compaction.

Is a constant rate realistic?

Only roughly. Use dated horizons to build an age-depth model with a rate that changes along the core.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.