Skip to content
Omnikalc

Longshore sediment transport calculator: how much sand do waves move along the coast?

Enter the breaking wave height, the breaker angle and the coefficient to get the longshore sand transport per year and per day.

Updated on
Your inputs
ft

Value out of range

°

Value out of range

Value out of range

Results

Longshore sand transport per year

825,949 yd³/yr

Longshore sand transport per day
2,263 yd³/day
Truckloads per year (10 yd³ each)
82,595

Waves that arrive at an angle push sand along the beach, and over a year the volume can be huge. The longshore sediment transport calculator uses the CERC formula with the breaking wave height, the breaker angle and the coefficient K, and gives the sand transport per year and per day, and the equivalent number of truckloads.

How the calculation works

  • Enter the wave height at breaking, the angle between the breaking wave crests and the shoreline, and the CERC coefficient K, which is 0.39 when the significant wave height is used.
  • The calculator uses the CERC formula of the US Army Corps of Engineers: Q = K × ρ √(g / γb) / (16 (ρs − ρ)(1 − p)) × Hb^2.5 × sin(2αb).
  • It assumes sea water of 1,025 kg/m³, quartz sand of 2,650 kg/m³, a porosity of 0.4 and a breaker index γb of 0.78.
  • The result is the volume of sand moved along the shore each year and each day by the waves that break at an angle, and the equivalent number of truckloads.

Example

Waves break with a height of 3 ft (0.914 m) at an angle of 8° to the shore. With K = 0.39, the transport rate is 0.0909 × 0.914^2.5 × sin 16° = 0.0200 m³/s. In a year, this is 631,000 m³, or about 826,000 yd³, which is about 2,260 yd³ per day and 82,600 truckloads of 10 yd³.

Why it matters

Coastal engineers, port authorities and beach managers need to know how much sand moves along a shore before they build a jetty, a groin or a marina, or before they plan a beach fill. The calculation gives a first order of magnitude, shows how sensitive the transport is to the wave height and the angle, and helps to see why some beaches shrink.

Good to know

The CERC formula is an empirical estimate for sand beaches, based on a single wave condition. Real transport depends on the whole mix of waves in the year, on tides, on currents, on the grain size and on the slope, and it can be off by a factor of two or more. It gives the potential transport and not the actual one, which is limited by the supply of sand. Use it for preliminary studies only.

The wave power calculator gives the energy flux in waves, the wind setup calculator covers the rise of water at the shore, the tide height calculator covers the tide cycle, and the ocean wave speed calculator gives the speed of waves.

Frequently asked questions

What is longshore drift?

It is the movement of sand and gravel along a coast by waves that arrive at an angle. The swash carries grains up the beach in the direction of the waves, while the backwash brings them straight down, so grains move along the shore in a zigzag. The net flow can be millions of cubic yards a year on an open coast.

What is the CERC formula?

It is the standard formula of the Coastal Engineering Research Center for the rate of sand transport by waves. It says that the transport grows with the wave height to the 2.5 power and with the sine of twice the breaker angle. It is highest at an angle of 45° and falls to zero when the waves arrive parallel to the shore.

What value of K should I use?

The coefficient K is 0.39 when the significant breaking wave height is used, and about 0.92 when the root-mean-square height is used. Field data show that it varies with the grain size and the beach slope, from 0.2 for coarse sand or gravel to over 0.6 for fine sand. Calibrate it with measured transport when you can.

Why does this matter for jetties and groins?

A structure that blocks the longshore flow traps sand on the updrift side, and starves the downdrift beach, which then erodes. This is why a harbour jetty can cause erosion for miles. The yearly volume is the base for planning sand bypassing, beach nourishment and for the design of coastal structures.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.