Skip to content
Omnikalc

SWEAT severe weather threat index calculator

Enter the temperatures, the dew point and the winds at 850 and 500 hPa to get the Severe Weather Threat index and its terms.

Updated on
Your inputs
°C

Value out of range

°C

Value out of range

°C

Value out of range

kt

Value out of range

°

Value out of range

kt

Value out of range

°

Value out of range

Results

SWEAT index

420

Total Totals
52 °C
Moisture term 12 × Td850
144
Instability term 20 × (TT − 49)
60
Wind speed terms (2 × f850 + f500)
95
Wind shear term
121
Class (0 under 300, 1 from 300, 2 from 400)
2

The SWEAT index calculator gives the Total Totals, the moisture, instability, wind and shear terms and the SWEAT index with its class, from the temperature, dew point and winds at 850 and 500 hPa.

How the calculation works

  • Enter the temperature and dew point at 850 hPa and the temperature at 500 hPa.
  • Enter the wind speed in knots and the direction in degrees at 850 and at 500 hPa.
  • Read the SWEAT index and compare it with 300 and 400.

Example

With a dew point of 12 °C and a Total Totals of 52 °C, the moisture term is 144 and the instability term 60. The wind terms add 95 and the shear term 121, so the SWEAT index is 420, class 2.

Why it matters

The calculator helps students of meteorology, storm chasers and aviation weather enthusiasts who study historical severe-weather indices and want to apply the formula to a sounding without errors in the conditional wind term.

Good to know

Enter wind directions as the direction the wind blows from, in degrees, and speeds in knots. The conditional shear term is zero unless the wind pattern fits the definition, so a result without it can be well below a result with it. SWEAT is an old index that has been replaced in daily work by parameters such as CAPE, bulk shear and storm-relative helicity, so use it as a rough indicator only. It does not describe the trigger of storms, and the thresholds apply best to the central United States. Always follow official warnings.

The Total Totals and K-index calculator gives stability indices, the dew point calculator gives the dew point, the wind shear power law calculator extrapolates the wind with height and the lightning distance calculator estimates the distance of a strike.

Frequently asked questions

What is the SWEAT index?

The Severe Weather Threat index, or SWEAT, was developed by the US Air Force in the 1970s to flag the risk of severe thunderstorms and tornadoes. It combines moisture (the dew point at 850 hPa), instability (the Total Totals), the wind speeds at 850 and 500 hPa and a term for the turning of the wind with height.

How is it computed?

SWEAT = 12 Td850 + 20 (TT − 49) + 2 f850 + f500 + 125 (S + 0.2), with Td850 the dew point in °C (set to zero if negative), TT the Total Totals (the term is zero if TT is below 49), f the wind speeds in knots and S = sin(d500 − d850). The shear term is applied only if the 850 hPa wind is from 130° to 250°, the 500 hPa wind from 210° to 310°, the wind veers with height and both speeds are at least 15 knots.

What values are significant?

A SWEAT above about 300 suggests that severe thunderstorms are possible, and above 400 that tornadoes may occur. The thresholds were set for the central United States and are less reliable elsewhere. Many forecasters now use CAPE, shear and helicity, which describe the storm environment better.

Why is the shear term often zero?

Because it requires a specific wind pattern: southerly to southwesterly flow at 850 hPa that veers to westerly at 500 hPa. In other patterns, the term is not applied, and the index relies on the other terms. This conditional rule is part of the original definition.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.