Skip to content
Omnikalc

Vertical exaggeration calculator: how much steeper does the section look?

Enter the horizontal and vertical scales, the true slope, the relief and the distance to get the vertical exaggeration, the apparent slope and the height and length drawn on the section.

Updated on
Your inputs

Value out of range

Value out of range

°

Value out of range

Value out of range

Value out of range

Results

Vertical exaggeration

5.00 ×

Apparent slope on the section
46.7 °
Height drawn on the section
1.50 in
Length drawn on the section
13.2 in

Cross-sections and terrain models often stretch the vertical axis so that the relief can be seen. The vertical exaggeration calculator takes the horizontal scale, the vertical scale, the true slope, the relief and the horizontal distance and gives the vertical exaggeration, the apparent slope on the drawing, the height drawn and the length drawn.

How the calculation works

  • Vertical exaggeration = horizontal scale denominator ÷ vertical scale denominator. A section drawn at 1 : 24 000 horizontally and 1 : 4 800 vertically is exaggerated five times.
  • Apparent slope = arctan(exaggeration × tan(true slope)). A gentle slope looks much steeper on an exaggerated section.
  • Height drawn = relief ÷ vertical scale denominator, and length drawn = distance ÷ horizontal scale denominator.
  • An exaggeration of 1 means the section has the same scale in both directions and shows true shapes.

Example

A section is drawn at 1 : 24 000 horizontally and 1 : 4 800 vertically, so the exaggeration is 24 000 ÷ 4 800 = 5×. A true slope of 12° appears as arctan(5 × tan 12°) = 46.7°. A relief of 600 ft is drawn 1.5 in high (600 ÷ 4 800 = 0.125 ft), and a distance of 5 mi is drawn 13.2 in long.

Why it matters

Knowing the exaggeration stops a reader from taking a stretched drawing for the real landscape. Geologists, hydrologists and engineers use it to check a profile, choose a vertical scale that shows relief without distorting too much, and convert the apparent slope back to the true one.

Good to know

The calculation uses the scale denominators of the drawing, which must be in the same unit in both directions. The apparent slope applies to a straight slope seen in the section plane, and it does not apply to a slope that runs at an angle to the section. Check the exaggeration printed on published maps and sections, because it is often stated on the figure.

The ground sample distance calculator relates a photograph to the ground it covers and the vertical curve calculator designs the profile of a road over a crest or a dip.

Frequently asked questions

What is vertical exaggeration?

It is the ratio between the horizontal and the vertical scale of a cross-section, a profile or a 3D terrain model. Relief is small next to the horizontal distances in most landscapes, so a drawing at one scale would show nothing. Exaggeration stretches the height so features can be seen.

How do I compute it from the scales?

Divide the horizontal scale denominator by the vertical one. For a horizontal scale of 1 : 50 000 and a vertical one of 1 : 5 000, the exaggeration is 50 000 ÷ 5 000 = 10. If the scales are given as a ratio of lengths such as 1 inch = 400 ft, convert both to the same units first.

Why does the slope look steeper?

Stretching the vertical axis multiplies the rise but not the run, so the tangent of the slope is multiplied by the exaggeration. A slope of 10 degrees has a tangent of 0.176, and with 5 times exaggeration it becomes 0.88, which is 41 degrees. Always state the exaggeration on a section.

When should I avoid exaggeration?

When the true shape matters, such as in engineering drawings of an embankment or in a section that shows faults and folds with their true dips. A geologist may draw both an exaggerated profile and a true-scale one, and label each with its vertical exaggeration.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.