Skip to content
Omnikalc

Sailboat performance ratios calculator: is the boat powerful, light and stable?

Enter the sail area, the displacement, the waterline length, the beam and the ballast to get the sail area to displacement ratio, the displacement to length ratio, the ballast ratio and the capsize screening value.

Updated on
Your inputs

Value out of range

Value out of range

Value out of range

Value out of range

Value out of range

Results

Sail area to displacement ratio

18.6

Balanced cruising range
Displacement to length ratio
204
Moderate: typical cruiser
Ballast ratio
36.1%
Capsize screening formula
1.76
Acceptable for offshore use

A few ratios describe how a sailboat will behave before you ever sail it. The sailboat performance ratios calculator takes the sail area, the displacement, the waterline length, the beam and the ballast weight and gives the sail area to displacement ratio, the displacement to length ratio, the ballast ratio and the capsize screening value, each with a plain reading.

How the calculation works

  • Sail area to displacement ratio = sail area in square feet ÷ (displacement in pounds ÷ 64)^(2/3). The displacement is converted to cubic feet of seawater. A higher value means more sail for the weight.
  • Displacement to length ratio = (displacement in long tons) ÷ (0.01 × waterline length in feet)³, where a long ton is 2 240 pounds. It tells you whether the hull is light or heavy for its length.
  • Ballast ratio = ballast weight ÷ displacement × 100. Many cruising boats are between 30 and 45 percent.
  • Capsize screening formula = beam in feet ÷ (displacement in pounds ÷ 64)^(1/3). A value of 2.0 or less is the usual limit for offshore boats.

Example

A boat has 800 ft² of sail, a displacement of 18 000 lb, a waterline of 34 ft, a beam of 11.5 ft and 6 500 lb of ballast. The sail area to displacement ratio is 800 ÷ 281.25^(2/3) = 18.6, a balanced cruiser. The displacement to length ratio is 8.04 ÷ 0.34³ = 204, moderate. The ballast ratio is 36.1 percent and the capsize screening value is 1.76.

Why it matters

When you compare boats from a brochure, the ratios give an honest picture of a design that the numbers of length and price do not show. They help you decide whether a boat suits light coastal wind or heavy passages, and whether it can carry the sail you expect.

Good to know

The ratios are rough guides, and they depend on how the numbers are measured. Use the displacement of the boat as it sails, with water, fuel and gear, and the sail area of the working sails. Two boats with the same ratios can sail very differently because of keel, rudder and hull shape. A sea trial remains the best judge.

The hull speed calculator gives the speed limit for a displacement hull and the VMG sailing calculator shows how much of your speed helps you reach the mark upwind.

Frequently asked questions

What does the sail area to displacement ratio tell me?

It compares the sail area to the weight the boat has to move. Below about 15 the boat is under-canvased and needs a good breeze. Between 16 and 20 is typical of a cruiser, and above 20 the boat is sporty. Racing boats are often above 25.

What does the displacement to length ratio tell me?

It compares the weight of the boat to the length of the waterline, as a measure of how light or heavy it is. Below 100 is an ultralight racer, 100 to 200 is light, 200 to 300 is moderate, and above 300 is heavy. A heavier boat is more comfortable in a seaway and slower in light wind.

Is a high ballast ratio always better?

No. Ballast gives stability, but the depth of the keel, the shape of the hull and the beam matter as much. A deep, narrow keel with 35 percent of ballast can be more stable than a shallow one with 45. Use the ratio as a first look, not as a rating.

What is the capsize screening formula?

It is a rule of thumb that compares beam to the cube root of the displacement. It was written to help judge the safety of offshore boats after a bad storm in 1979. A value above 2.0 flags a boat that is wide for its weight, but it does not say whether the boat will capsize.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.