Skip to content
Omnikalc

Asphalt mix air voids, VMA and VFA calculator

Enter Gmb, Gmm, the binder content, the aggregate specific gravity and the fines to get the air voids, the VMA, the VFA, the effective binder and the dust to binder ratio.

Updated on
Your inputs

Value out of range

Value out of range

%

Value out of range

Value out of range

Value out of range

%

Value out of range

Results

Air voids Va

4.08 %

Air voids in the usual range of 3 to 5 percent
Voids in the mineral aggregate VMA
14.79 %
Margin of the VMA over the minimum
0.79 %
The VMA meets the minimum
Voids filled with asphalt VFA
72.4 %
VFA in the usual range of 65 to 78 percent
Effective binder content Pbe
4.69 %
Dust to effective binder ratio
1.07
Dust to binder ratio between 0.6 and 1.2

The asphalt mix volumetrics calculator gives the air voids, the VMA, the VFA, the effective binder content and the dust to binder ratio of a hot mix asphalt from the specific gravities of the mix and of the aggregate.

How the calculation works

  • Enter the bulk specific gravity of the compacted mix (Gmb), the maximum theoretical specific gravity (Gmm) and the binder content.
  • Enter the bulk specific gravity of the aggregate (Gsb), the specific gravity of the binder, the fines and the nominal maximum size.
  • The calculator gives the air voids, the VMA, the VFA, the effective binder content and the dust to binder ratio.

Example

A compacted asphalt specimen has Gmb = 2.350, the loose mix has Gmm = 2.450, the binder content is 5.0 percent and the aggregate has Gsb = 2.620. The air voids are Va = 100 (1 − Gmb / Gmm) = 4.08 percent. The voids in the mineral aggregate are VMA = 100 − Gmb Ps / Gsb = 100 − 2.350 × 95 / 2.620 = 14.79 percent, which is 0.79 above the 14 percent minimum of a 12.5 mm mix. The voids filled with asphalt are VFA = 100 (VMA − Va) / VMA = 72.4 percent. The effective specific gravity of the aggregate is 2.642, the absorbed binder 0.32 percent, and the effective binder content 4.69 percent, so with 5 percent fines the dust ratio is 1.07.

Why it matters

The calculator helps asphalt technicians, mix designers and inspectors to check the volumetrics of a design or of a plant sample in seconds, to see whether the mix meets the specification and to see the effect of a change in the binder content.

Good to know

Measure the specific gravities with care: Gmb on a specimen dried to a constant mass, and Gmm on a loose sample dried and de-aired. Take the Gsb from the test of the blend of the aggregates, weighted by the mass of each. If the VMA is low, change the gradation, not the binder content. If the air voids are low at the design binder content, reduce the binder by 0.2 to 0.3 percent and test again. Keep the dust ratio between 0.6 and 1.2.

The flexible pavement ESAL calculator gives the thickness for the traffic, the asphalt paver production calculator sizes the paving crew, the pothole patch calculator gives the asphalt for a repair and the soil gradation calculator analyses a sieve test.

Frequently asked questions

What are the volumetrics of an asphalt mix?

The volumetrics are the volume fractions of the compacted mix: the air voids (Va), the voids in the mineral aggregate (VMA), which are the air and the effective binder together, and the voids filled with asphalt (VFA), the share of the VMA that holds the binder. They are the basis of the Superpave and Marshall mix designs (AASHTO R 35, M 323), and the field quality control.

What are the usual limits?

The design air voids are 4.0 percent, and the field limit is about 3 to 5 percent. The minimum VMA depends on the aggregate size: 15 percent for 9.5 mm, 14 for 12.5 mm, 13 for 19 mm, 12 for 25 mm and 11 for 37.5 mm. The VFA is about 65 to 78 percent for the common traffic levels, and the dust to effective binder ratio is 0.6 to 1.2.

What is the effective binder content?

Part of the binder is absorbed by the aggregate and does not coat the particles. The effective binder content is the total binder minus the absorbed binder: Pbe = Pb − Pba Ps / 100. The effective specific gravity of the aggregate Gse follows from Gmm. It is the effective binder that gives the film thickness, the durability and the stiffness of the mix.

What does the calculator leave out?

The calculator leaves out the correction for the water absorption in the measurement of Gmb, the film thickness, the recycled asphalt and the volumetrics of a stone matrix mix. The specific gravities must be measured by the tests (AASHTO T 166, T 209, T 84 and T 85). Small errors in Gmb or Gmm move the air voids by several tenths of a percent.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.