Skip to content
Omnikalc

Pothole patch asphalt calculator: area, tons of mix and crew hours

Enter the number of potholes, the diameter, the depth, the mix density, the allowance and the crew production to get the area, the volume, the tons of mix and the crew hours.

Updated on
Your inputs

Value out of range

ft

Value out of range

in

Value out of range

pcf

Value out of range

%

Value out of range

patches/h

Value out of range

Results

Asphalt mix to order

5.89 tons

Area patched
212 ft²
Volume of the patches
70.7 ft³
Crew hours
20.0 h

The pothole patch asphalt calculator gives the area patched, the volume of the patches, the tons of asphalt mix to order and the crew hours of a pothole repair program, from the number and the size of the potholes, the depth and the density of the mix.

How the calculation works

  • Enter the number of potholes, their average diameter and the depth of the patch.
  • Enter the density of the compacted mix, the compaction and waste allowance and the crew production.
  • The calculator finds the area patched, the volume, the asphalt mix to order and the crew hours.

Example

A program of 120 potholes with an average diameter of 1.5 ft patches 120 × 0.7854 × 1.5² = 212 ft². With a patch 4 in deep, the volume is 212.06 × 4 / 12 = 70.7 ft³. The compacted mix weighs 145 pcf, so with a 15 % allowance the order is 70.69 × 145 / 2,000 × 1.15 = 5.89 tons. A crew that makes 6 patches/h needs 120 / 6 = 20.0 h.

Why it matters

The calculator helps public works crews, road maintenance supervisors, contractors and students to order the right tonnage of asphalt for a repair program, to plan the crew hours after a winter, and to compare the quantity of mix of several depths or sizes of patches.

Good to know

Cut the edges of the pothole square and vertical, clean it and let it dry, then tack the sides and the bottom. Place the mix in layers of 3 in or less, compact each layer with a plate compactor or a roller, and leave the patch slightly high. Keep the mix at the right temperature and order only what the crew can place before it cools.

The asphalt paver production and trucks calculator plans a paving crew, the driveway paving cost calculator estimates a small paving job, the compaction roller production calculator sizes the compaction and the chip seal aggregate and emulsion rate calculator sizes a surface treatment.

Frequently asked questions

How is a pothole patched?

A pothole is repaired by cutting the edges square, removing the loose material and the water, tacking the sides and the bottom, filling with asphalt mix in layers and compacting it. A hot mix is the best for a long-term repair, and a cold mix is used for the temporary repairs in the cold or wet weather. A patch that is well compacted and slightly above the surface lasts much longer than a quick fill.

How is the quantity of mix found?

The area of a round pothole is 0.7854 times the diameter squared. The volume is the total area times the depth of the patch. The volume is multiplied by the density of the compacted mix to get the weight, and by an allowance for the compaction and the waste. In imperial units the weight in pounds is divided by 2,000 to get the tons, and in metric the density in t/m³ gives the tons directly.

Why is there an allowance?

The loose mix has a volume larger than the compacted mix, the patch is overfilled to be compacted to the surface level, and some mix is lost on the shovel, the truck and the edges. An allowance of 10 to 20 % is common. The real pothole is also larger than the visible hole once the loose edges are cut square, so that the cut size is the one that counts.

What are the limits of the calculator?

The calculator gives the quantity of mix for round potholes of equal size. It does not include the potholes of a different size, the tack coat, the cleaning, the traffic control, the transport of the mix, the heating of the truck or the waste of the cold mix left in the truck at the end of the day. The patches over a weak base or a wet subgrade need a deeper repair, and their quantity is higher.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.