Skip to content
Omnikalc

Bollard vehicle impact energy and bending moment calculator

Enter the weight and the speed of the vehicle, the stopping distance, the height of the impact and the steel strength to get the energy, the force, the moment and the section modulus of the bollard.

Updated on
Your inputs
lb

Value out of range

mph

Value out of range

ft

Value out of range

ft

Value out of range

ksi

Value out of range

Results

Plastic section modulus required

83.6 in³

Kinetic energy of the vehicle
150.4 kip·ft
Equivalent static force
100.3 kip
Bending moment at the ground
225.6 kip·ft

The bollard vehicle impact calculator gives the kinetic energy of the vehicle, the equivalent static force, the bending moment at the ground and the plastic section modulus required for a steel bollard, from the weight and the speed of the vehicle, the stopping distance and the strength of the steel.

How the calculation works

  • Enter the weight of the vehicle and its speed at the impact.
  • Enter the stopping distance, the height of the impact above the ground and the yield strength of the steel.
  • The calculator finds the kinetic energy, the equivalent static force, the bending moment and the plastic section modulus that the bollard needs.

Example

A pickup of 5,000 lb hits a bollard at 30 mph, that is 44 ft/s. Its energy is 0.5 × (5,000 / 32.174) × 44² = 150.4 kip·ft. If the vehicle stops in 1.5 ft, the equivalent force is 150.4 / 1.5 = 100.3 kip. At an impact height of 2.25 ft, the moment at the ground is 225.6 kip·ft. With steel of 36 ksi and a factor of 0.9, the plastic section modulus must be at least 83.6 in³.

Why it matters

The calculator helps site designers, facility managers, contractors and students to compare the energy of different vehicles and speeds, to see why a bollard in a parking lot needs less than a bollard beside a loading road, and to check the size of a pipe before they ask for a rated product.

Good to know

Choose the design vehicle and the speed from the site: a parking lot, a loading dock and a main road are not the same. Make the stopping distance realistic, because a short distance gives a very large force. Place the bollards so that the vehicle cannot gain speed before them, check the underground pipes and cables before the digging, and prefer a rated and certified product when the risk is high.

The crash force calculator gives the force of a stop over a distance, the falling weight impact calculator gives the energy of a drop, the kinetic energy calculator gives the energy of a moving mass and the base plate size calculator sizes the plate of a steel post.

Frequently asked questions

How is the impact energy found?

The kinetic energy of the vehicle is half its mass times the square of its speed. The mass is the weight divided by 32.174 ft/s², and the speed in feet per second is the speed in miles per hour times 22 / 15. Doubling the speed multiplies the energy by four, which is why a bollard that stops a car at 20 mph can fail at 40 mph.

What is the equivalent static force?

A simple way to design is to say that the energy is absorbed by the bollard and the vehicle over a distance. The average force is then the energy divided by this stopping distance. A stiff bollard that stops the vehicle in a short distance receives a very high force, and a bollard that bends or moves absorbs the energy over a longer distance.

How is the section found?

The bending moment at the ground is the force times the height of the impact. The plastic section modulus is the moment divided by 0.9 times the yield strength. Choose a pipe or a section with a plastic modulus at least as large, and fill the pipe with concrete if needed. The foundation must resist the same moment.

What are the limits of the calculator?

The calculator is a hand estimate of the energy and not a crash-tested design. Rated bollards are tested to standards for the vehicle, the speed and the penetration. Use a rated product or an engineered design when the bollard protects people, a building or a gas meter, and check the foundation and the underground utilities.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.