Skip to content
Omnikalc

Detention pond storage calculator: how much volume to reduce a peak flow? (TR-55 method)

Enter the design storm, the curve number, the drainage area and the inflow and outflow peaks to get the runoff depth and volume, the storage ratio and the storage volume needed by the TR-55 approximate method.

Updated on
Your inputs
in

Value out of range

Value out of range

acres

Value out of range

cfs

Value out of range

cfs

Value out of range

Results

Storage volume needed

2.33 acre-ft

Runoff depth
3.37 in
Runoff volume
5.61 acre-ft
Ratio of storage to runoff volume
0.414
Storage volume needed in cubic feet
101,338 ft³

The detention pond storage calculator gives the storage volume needed to reduce a peak flow with the TR-55 approximate method, from the design storm, the curve number, the drainage area and the peak inflow and outflow.

How the calculation works

  • Enter the rainfall depth of the design storm and the curve number of the developed drainage area.
  • Enter the drainage area, the peak inflow rate of the developed condition and the allowable peak outflow, which is usually the pre-development peak.
  • The calculator finds the runoff depth with the SCS curve number method, the runoff volume, and the storage volume with the TR-55 approximate method for the detention basins (Type II and III storms).

Example

A site of 20 acres with CN = 85 receives 5 in of rain. The potential retention is S = 1,000 / 85 − 10 = 1.765 in, and the runoff is 3.37 in, a volume of 3.37 / 12 × 20 = 5.61 acre-ft. The peak inflow of 60 cfs must be cut to 15 cfs, a ratio of 0.25. Vs / Vr = 0.682 − 1.43 × 0.25 + 1.64 × 0.25² − 0.804 × 0.25³ = 0.414, so the storage is 2.33 acre-ft, or 101,338 ft³.

Why it matters

The calculator helps civil engineers, land developers, planners, reviewers and students to estimate the size of a stormwater detention basin early in the design of a site, to compare the effect of the allowable release rate and of the impervious area. It gives a quick check before the hydrograph routing.

Good to know

Use the storm and the release rates required by the local authority, usually the 2-, 10- and 100-year storms. Use the curve number of the fully developed area and the Type of storm of the region. Add a freeboard and the volume for the sediment, and verify the result with a routing calculation before the final design.

The SCS curve number calculator gives the runoff depth, the rational method calculator gives a peak flow, the time of concentration calculator gives the travel time of the runoff and the detention time calculator gives the retention time of a tank.

Frequently asked questions

What is a detention pond?

A detention pond is a basin that stores stormwater temporarily and releases it slowly through an outlet, so that the peak flow leaving a developed site is not higher than before the development. It protects the downstream channels and properties from the flooding and the erosion caused by the increased runoff of the roofs and the pavements. The volume is the main parameter of the design, with the outlet structure.

What is the TR-55 approximate method?

The method of Technical Release 55 of the NRCS gives the storage volume from the ratio of the peak outflow to the peak inflow, qo / qi, with the equation Vs / Vr = 0.682 − 1.43 (qo/qi) + 1.64 (qo/qi)² − 0.804 (qo/qi)³ for the storms of Type II and III, where Vr is the volume of the runoff. The smaller the allowable outflow compared with the inflow, the larger the storage: reducing the peak by 75% needs 41% of the runoff volume.

How is the runoff volume found?

The curve number method gives the runoff depth Q = (P − 0.2 S)² / (P + 0.8 S), with S = 1,000 / CN − 10 in inches. The curve number depends on the soil, the land use and the antecedent moisture. The volume is the depth multiplied by the drainage area. The calculator takes the curve number of the developed condition because it is the one that produces the larger volume.

What are the limits of the calculator?

The approximate method is for a first estimate of the storage, for a single basin with a standard outlet, and its accuracy is about ±25%. The final design needs a routing of the hydrograph through the basin with the real stage-storage-discharge relations, for several storms. It does not include the infiltration, the freeboard, the sediment storage, nor the emergency spillway. The local rules govern, and a civil engineer must design the pond.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.