Skip to content
Omnikalc

Dryer vent equivalent length and limit calculator

Enter the straight length of the duct, the number of elbows and the maximum length to get the equivalent length, the length left and the ratio to the limit.

Updated on
Your inputs
ft

Value out of range

Value out of range

Value out of range

ft

Value out of range

Results

Equivalent length of the duct

34.5 ft

Length left before the limit
0.5 ft
Ratio to the maximum length
0.99
At the limit: little room for lint, keep the duct clean

The dryer vent equivalent length calculator gives the equivalent length of a dryer exhaust duct with its 90 and 45 degree elbows, the length left before the limit and the ratio to the maximum length, from the straight length, the number of elbows and the maximum allowed.

How the calculation works

  • Enter the straight length of the dryer duct.
  • Enter the number of 90 degree and 45 degree elbows, and the maximum length allowed by the code or the dryer manual.
  • The calculator finds the equivalent length, the length left and the ratio to the limit.

Example

A dryer duct with 22 ft of straight pipe, 2 elbows of 90 degrees and 1 elbow of 45 degrees has an equivalent length of 22 + 2 × 5 + 1 × 2.5 = 34.5 ft. The maximum is 35 ft, so only 0.5 ft is left, and the ratio is 0.99, at the limit of the allowable length.

Why it matters

The calculator helps builders, installers, inspectors, appliance technicians and homeowners to check a dryer duct against the 35 ft rule before they install it, to see how many elbows the duct can have, and to find out if a booster fan or a new route is needed.

Good to know

Make the duct as short and as straight as you can, and send it by the shortest way to the outside with a hood that has a damper. Do not end the duct in an attic, a crawl space or a garage. Keep at least 12 in between the end of the duct and any opening that is near, and measure the real length with all the fittings and the elbows. Check the duct for lint every year.

The range hood calculator gives the airflow of a kitchen hood, the air changes calculator gives the ventilation of a room, the residential ventilation rate calculator gives the airflow for the whole house and the duct size calculator gives the diameter of a duct.

Frequently asked questions

What is the maximum length of a dryer duct?

The International Residential Code limits a dryer exhaust duct to 35 ft from the dryer to the outside, measured from the connection of the dryer. This length is reduced by 5 ft for each 90 degree elbow and by 2.5 ft for each 45 degree elbow, because the elbows slow the air. The manual of the dryer may give a different maximum, and the code allows a longer duct if the manufacturer states the allowed length.

What duct should I use?

Use a smooth metal duct of 4 in diameter, rigid or semi-rigid, with joints sealed with foil tape and not screws, as the screws catch the lint. Plastic and foil flexible ducts are not allowed in many places because they sag, trap lint and can burn. A flexible metal connector may be used only behind the dryer, in the short length that the code allows, and it must not pass through a wall.

How does a long duct affect the dryer?

Every elbow and every foot of duct add a resistance that slows the exhaust. The clothes then dry slower, the dryer uses more energy, the lint builds up and the risk of a fire increases. If the duct is too long, a booster fan approved for dryers can be installed, or the dryer can be moved nearer to an outside wall. Clean the duct once a year.

What does the calculator leave out?

The calculator uses the equivalent lengths of the code and does not include the special fittings, the louvered terminations, the reducers or the roof terminations, which add their own resistance. It does not treat the duct of a commercial dryer, of a gas dryer with a draft hood or of a condensing dryer without a duct. Check the manual of the dryer and the local code.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.