Skip to content
Omnikalc

Dump truck loads calculator: volume or payload limit and number of loads

Enter the bank volume, the swell, the bank density, the truck body capacity and the payload limit to get the loose volume, the volume and payload per load and the number of loads.

Updated on
Your inputs
yd³

Value out of range

%

Value out of range

lb/yd³

Value out of range

yd³

Value out of range

tons

Value out of range

Results

Loads to haul

893

Loose volume to haul
12,500 yd³
Volume per load
14.0 yd³
Payload per load
16.8 tons
Payload as a share of the limit
0.84
The body is filled to its capacity

The dump truck loads calculator gives the loose volume to haul, the volume and payload per load, the payload as a share of the limit and the number of loads of a haul job, from the bank volume, the swell, the density and the truck capacity.

How the calculation works

  • Enter the volume to haul in bank measure, the swell and the bank density of the material.
  • Enter the heaped capacity of the truck body and the legal payload limit.
  • The calculator finds the loose volume, the volume and payload per load, the share of the limit and the number of loads.

Example

A job of 10,000 yd³ in the bank with 25 % of swell has 10,000 × 1.25 = 12,500 yd³ of loose material. The bank density of 3,000 lb/yd³ gives a loose density of 3,000 / 1.25 = 2,400 lb/yd³. A truck body of 14 yd³ then carries 14 × 2,400 / 2,000 = 16.8 tons, which is 0.84 of the limit of 20 tons, so the volume governs. The number of loads is 12,500 / 14 = 893.

Why it matters

The calculator helps earthwork contractors, haul planners, estimators and students to find the number of truck loads of a job, to see whether the volume or the weight governs, and to compare several truck sizes or materials before the work starts.

Good to know

Check the weight of the first loads at a scale, because the density of the real material can differ from the value of the calculation. Do not overload the trucks, even if the body can take more, and load them evenly. Adjust the number of loads with the moisture of the material, and plan the haul with the cycle time of the trucks.

The excavator productivity cycle calculator sizes the digging, the earthwork swell and shrink calculator gives the volumes of the soil, the haul truck rimpull and grade calculator checks the trucks on a grade and the wheel loader cycle production calculator sizes the loading.

Frequently asked questions

What limits the load of a dump truck?

A dump truck can be limited by the volume of its body or by its legal weight limit. With a light material, such as dry topsoil or sand, the body is full before the weight limit is reached. With a heavy material, such as wet clay or crushed rock, the weight limit is reached before the body is full. The load that is really carried is the smaller of the two limits.

What is the swell?

When the soil is dug, it becomes loose and takes more volume than in the bank. The swell is the increase of volume, in percent, and the loose density is the bank density divided by one plus the swell. The trucks carry loose material, so the number of loads is computed with the loose volume, even if the quantities of the job are measured in the bank.

How is the number of loads found?

The loose volume to haul is the bank volume times one plus the swell. The volume per load is the capacity of the body, or the volume that gives the legal payload if it is smaller. The number of loads is the loose volume divided by the volume per load, rounded up. The number of trips of the trucks per hour then depends on the cycle time of the haul.

What are the limits of the calculator?

The calculator uses a single density and a single truck. It does not take into account the moisture, which changes the weight a lot, the mixed fleet of trucks, the loads that are not full at the end of the job, the spillage or the axle weight limits that apply on some roads. The legal payload depends on the truck and the road, and it must be checked with the weight tickets.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.