Skip to content
Omnikalc

Frost penetration depth calculator: how deep the ground freezes and where to put a footing

Enter the freezing index, the density, the water content and the conductivity of the soil to estimate the depth of frost with the Stefan equation, and check the depth of a footing.

Updated on
Your inputs
°F-days

Value out of range

lb/ft³

Value out of range

%

Value out of range

W/(m·K)

Value out of range

ft

Value out of range

Results

Frost penetration depth

3.31 ft

Frost depth in meters
1.008 m
Latent heat of the soil water
96.3 MJ/m³
Margin between the footing and the frost depth
-0.31 ft
The footing is above the estimated frost depth: risk of frost heave

The ground freezes deeper in a cold winter, in a dry or sandy soil and in a conductive soil. The frost depth calculator applies the Stefan equation to the freezing index, the soil density, the water content and the conductivity, and compares the result with the depth of your footing.

How the calculation works

  • Enter the freezing index, the sum over the winter of the degrees below freezing, in degree-days: it comes from the local weather records.
  • Enter the dry density, the water content and the thermal conductivity of the frozen soil, and the depth of your footing.
  • The calculator applies the Stefan equation x = √(2 k FI / L), where L is the latent heat of freezing of the water in one cubic meter of soil.
  • The result is the frost depth, the latent heat and the margin between the footing and the frost.

Example

A site has a freezing index of 600 °F-days (333 °C-days). The soil has a dry density of 100 lb/ft³, a water content of 18 % and a conductivity of 1.7 W/(m·K). The latent heat is 96.3 MJ/m³ and the frost reaches 3.31 ft (1.008 m). A footing set at 3.0 ft has a margin of −0.31 ft: it is above the frost depth, and it should be lowered or protected.

Why it matters

The calculator helps builders and homeowners to understand why footings, posts and pipes go below the frost line, and to compare soils and winters. It is also useful for fence posts, deck piers, water lines and shallow burial depths.

Good to know

The Stefan equation is a first estimate. It ignores the sensible heat of the soil, the snow cover, the ground water flow and the layers of different soils, and it overestimates the depth for a bare soil. It does not tell you whether a soil is frost susceptible, which depends on the fines in the soil. For a structure, use the frost depth in the local code or the advice of a geotechnical engineer.

The footing size calculator gives the width of a footing for a load, the heat loss calculator estimates the losses of a building, the wall U-value calculator covers the insulation of walls, and the retaining wall calculator plans a wall in the same soil.

Frequently asked questions

What is the freezing index?

The freezing index is the sum, over a winter, of the number of degrees below freezing for each day, in °F-days or °C-days. A day with a mean of 20 °F counts for 12 °F-days. Highway and building codes use the index of a design winter, often the coldest in 10 or 30 years. Local weather services or the highway authority publish the values.

What is the Stefan equation?

It describes how a front of freezing moves into a uniform medium in a steady regime: the depth grows with the square root of the cold supplied, x = √(2 k FI / L). Water in the soil has to release its heat of fusion, 334 kJ/kg, before the soil gets colder, so a wet soil freezes less deeply than a dry one. The equation is the simplest one and is very common for a first estimate.

Why is the result larger than the local code depth?

Stefan’s equation ignores the heat stored in the soil before freezing and the insulation by the snow, the vegetation and the surface, so it overestimates by 20 to 100 % for a bare ground. Methods like the modified Berggren equation apply a correction factor of the order of 0.6 to 0.9. Use the local building code depth as the legal minimum, and the calculator as a way to understand the drivers.

How can I reduce the frost depth for a footing?

A footing can sit below the frost line, or be protected with horizontal rigid insulation that holds the heat of the ground, as in frost-protected shallow foundations. Drainage lowers the water content and the heave. A coarse, non-frost-susceptible backfill (clean gravel) avoids ice lenses. Heated buildings also keep the ground under them warmer than the open ground.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.