Skip to content
Omnikalc

Jet grout column pattern and volume calculator for ground improvement

Enter the area, the column diameter, the spacing ratio, the depth and the cement content to get the spacing, the number of columns, the drilled length, the treated volume and the cement.

Updated on
Your inputs
ft²

Value out of range

ft

Value out of range

Value out of range

ft

Value out of range

lb/ft³

Value out of range

Results

Number of columns

150

Spacing of the columns
3.40 ft
Total drilled length
4,500 ft
Volume of treated soil
1,666.7 yd³
Cement
562.5 tons

The jet grout column pattern and volume calculator gives the column spacing, the number of columns, the drilled length, the volume of treated soil and the cement of a jet grouting soil improvement, from the area, the diameter, the spacing ratio, the depth and the cement content.

How the calculation works

  • Enter the area to treat, the diameter of the columns, the spacing as a part of the diameter and the depth.
  • Enter the cement content of the treated soil.
  • The calculator finds the spacing, the number of columns, the drilled length, the volume of treated soil and the cement.

Example

A block of 1,500 ft² is treated to 30 ft with columns of 4 ft in diameter at 0.85 of the diameter, which is 3.40 ft in a triangular pattern. Each column covers 0.866 × 3.4² = 10.01 ft², so 150 columns are needed, with a drilled length of 150 × 30 = 4,500 ft. The treated soil is 1,500 × 30 / 27 = 1,666.7 yd³, and at 25 lb/ft³ the cement is 562.5 tons.

Why it matters

The calculator helps geotechnical engineers, specialty contractors, estimators and students to make a first estimate of the number of columns and of the quantities of a jet grouting job, to compare patterns and diameters, and to check the cost before the trial columns.

Good to know

Make trial columns to find the real diameter and the strength before the production, and core some of them. Keep the spoil under control with a good drainage and a plan for its disposal. Check the verticality of the drilling, and add some columns at the edge of the zone to be sure of the overlap with the neighboring ones.

The stone column calculator gives the replacement ratio of another ground improvement, the soil compaction calculator checks the density of a fill, the ground anchor bond length calculator sizes a tieback and the trench dewatering calculator sizes the pumping of an excavation.

Frequently asked questions

What is jet grouting?

Jet grouting is a ground improvement method in which a jet of grout at a very high pressure cuts the soil and mixes it with the grout, to make a column or a panel of soilcrete. A drill rod with nozzles is lowered to the depth and is pulled up while it turns. The columns can be used to underpin a foundation, to make a cutoff wall, to seal the bottom of an excavation or to improve a soft soil.

How is the pattern of the columns chosen?

The columns are placed in a triangular or a square pattern and they overlap, so that they make a continuous treated mass. The spacing is a part of the diameter, often 0.8 to 0.9 for a triangular pattern. A smaller spacing gives a bigger overlap and a safer mass, but it needs more columns. The real diameter depends on the soil, on the pressure, on the lift speed and on the system of the jets.

How is the cement quantity found?

The cement is the cement content of the treated soil times the volume of the treated soil. The content is often 300 to 500 kg of cement per cubic meter of soil, that is 19 to 31 lb/ft³, and it depends on the strength needed and on the soil. The quantity of the grout is larger, since it includes the water, and a part of the grout returns to the surface as spoil.

What are the limits of the calculator?

The calculator gives the quantities from a simple pattern. It does not take into account the diameter which changes with the soil, the verticality of the drilling, the columns at the edge of the zone, the spoil return, the double or triple fluid systems, the strength of the soilcrete or the tests of the trial columns. The design and the control of the jet grouting must be made by a specialist.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.