Skip to content
Omnikalc

Johnson parabola short column calculator

Enter the yield strength, the modulus, the length, the radius of gyration and the area to get the slenderness, the transition value and the critical stress and load by Johnson or Euler.

Updated on
Your inputs
ksi

Value out of range

ksi

Value out of range

Value out of range

in

Value out of range

in

Value out of range

in²

Value out of range

Value out of range

Results

Slenderness ratio KL/r

60.0

Critical buckling stress

31.9 ksi

Critical buckling load

127.7 kip

Transition slenderness Cc
126.1
Regime (0 Johnson inelastic, 1 Euler elastic)
0
Allowable load with the factor of safety
63.8 kip
Critical stress as a share of the yield strength
88.7 %

The Johnson parabola calculator gives the slenderness ratio, the transition slenderness, the regime (Johnson or Euler), the critical buckling stress, the critical load, an allowable load and the stress as a share of the yield strength, for a prismatic column.

How the calculation works

  • Enter the yield strength and the modulus of elasticity of the material.
  • Enter the effective length factor, the length and the radius of gyration of the section.
  • Enter the area and a factor of safety to get the loads.

Example

A column with K = 1, a length of 60 in and a radius of gyration of 1 in has a slenderness of 60.0, against a transition value of 126.1, so the regime is 0. The critical stress is 31.9 ksi, 88.7 % of the yield strength, and the critical load for 4 in² is 127.7 kip. With a factor of safety of 2, the allowable load is 63.8 kip.

Why it matters

The calculator helps mechanical and structural engineering students, machine designers and engineers who check steel struts, push rods, props and posts that are too stocky for the Euler formula, and who need a quick estimate of the load at which buckling starts.

Good to know

Use consistent units: ksi, inches and square inches in the US version, megapascals, gigapascals, millimeters and square centimeters in the metric one. The radius of gyration is for the axis about which the column buckles, normally the weaker one. The Johnson formula is for centrally loaded, straight columns made of a ductile material with a yield strength. Real columns have eccentricity and residual stresses, so design with the formulas of the applicable code, which include these effects, and treat this result as a first estimate.

The Euler buckling calculator gives the critical load of slender columns, the effective length factor calculator helps pick K, the wood column calculator covers timber and the Bresler reciprocal load calculator handles biaxial bending of columns.

Frequently asked questions

What is the Johnson parabola?

It is an empirical formula for the buckling of short and intermediate columns, for which the Euler equation overestimates the strength because the material yields before it buckles elastically. The critical stress is σcr = σy [1 − σy (KL/r)² / (4π²E)], a parabola that starts at the yield strength for a zero slenderness.

When does it apply instead of Euler’s formula?

The two curves meet and are tangent at the transition slenderness Cc = √(2π²E / σy), where the critical stress is half of the yield strength. Below Cc the Johnson parabola gives the critical stress, and above it the Euler formula σcr = π²E / (KL/r)² applies. The calculator picks the right one.

What is the effective length factor?

K accounts for the end conditions of the column: 1.0 for pinned ends, 0.5 for fixed ends, 0.7 for one end fixed and one pinned and 2.0 for one end fixed and one free. The product KL is the effective length used to compute the slenderness. For frames, K depends on the stiffness of the connected members.

Is the result the allowable load?

No. The result is the critical load at which the ideal column buckles. Design codes apply resistance or safety factors and account for the initial crookedness and the residual stresses, which reduce the strength. The calculator applies the simple factor of safety that you enter, as a first estimate.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.