The loading dock door calculator gives the number of dock doors, the trucks per hour at the peak, the utilization of the doors, the length of the dock wall and the staging area, from the trucks per day, the operating hours, the peak factor and the time that each truck stays at the dock.
How the calculation works
- Enter the trucks per day, the operating hours and a peak factor.
- Enter the average time that a truck stays at the dock and the target utilization of the doors.
- Enter the spacing of the doors and the staging area per door to get the number of doors, the wall length and the staging area.
Example
A warehouse receives 24 trucks a day over 10 hours, with a peak factor of 1.5, so 3.6 trucks arrive at the peak hour. Each truck stays 1 h, which keeps 3.6 doors in use at the peak. For a utilization of 80 %, the building needs 3.6 / 0.8 = 4.5, that is 5 doors, which run at 72 %. At 12 ft between centres the dock wall is 60 ft long, and a staging area of 600 ft² per door gives 3,000 ft².
Why it matters
The calculator helps warehouse planners, architects, developers, logistics managers and students to estimate the number of doors of a new building or of an extension, to see how the dwell time and the peak change the result, and to check a program of space before the detailed layout.
Good to know
Count the doors for the peak days of the year and not for the average day, and add a door or two for the future growth because a dock wall is hard to extend. Separate the receiving from the shipping when the volumes are large, give the trucks a safe route away from the pedestrians and the cars, and put the levelers and the seals at the right height for the trailers that you receive.
Related tools
The ready-mix truck fleet size calculator sizes the trucks of a pour, the dump truck loads calculator gives the loads of a haul, the parking ratio calculator gives the stalls of a building and the occupant load egress width calculator gives the exits of a space.