Skip to content
Omnikalc

Masonry veneer wall tie quantity calculator for brick and stone

Enter the wall area, the openings, the area per tie, the spacing around the openings, the waste and the box size to get the ties in the field, around the openings, the total and the boxes.

Updated on
Your inputs
ft²

Value out of range

ft²

Value out of range

Value out of range

ft

Value out of range

ft²

Value out of range

ft

Value out of range

%

Value out of range

Value out of range

Results

Total ties with waste

847

Net area of the wall
2,000 ft²
Ties in the field
750
Ties around the openings
56
Boxes to order
4

The masonry veneer wall tie quantity calculator gives the ties in the field, the ties around the openings, the total with waste and the boxes to order for a brick or stone veneer wall, from the area of the wall, the openings, the area supported by one tie and the spacing around the openings.

How the calculation works

  • Enter the gross area of the veneer wall, the area and the number of the openings, and the perimeter of each one.
  • Enter the area supported by one tie, the spacing around the openings, the waste and the ties per box.
  • The calculator finds the ties in the field, the ties around the openings, the total and the boxes.

Example

A veneer wall of 2,400 ft² has 400 ft² of openings, so the net area is 2,000 ft². With one tie for 2.67 ft², the field takes ceil(2,000 / 2.67) = 750 ties. The 12 openings of 14 ft of perimeter, with a tie every 3 ft, take 12 × 14 / 3 = 56 ties. With 5 % of waste, the total is 847 ties, that is 4 boxes of 250.

Why it matters

The calculator helps masons, estimators, builders and students to order the right number of wall ties for a veneer wall, to compare the cost of the standard and of the stricter ties, and to check that the quantity covers the openings and the waste of the job.

Good to know

Embed the ties in the mortar bed of the veneer and fix them to the backup wall as the manufacturer says, with the right fasteners for the studs or the blocks. Keep the air space clear of the mortar droppings, and protect the ties from the corrosion with a galvanized or a stainless steel in a humid climate or near the sea.

The masonry lintel load calculator checks the lintel above an opening, the masonry wall axial capacity calculator checks a loaded wall, the brick calculator gives the number of bricks of a wall and the hurricane tie-down uplift force calculator checks the uplift of the roof.

Frequently asked questions

What are veneer wall ties?

The wall ties, also called veneer anchors, are metal pieces that connect a masonry veneer, of brick or stone, to the backup wall of wood, steel or masonry. They carry the wind load and the seismic load of the veneer to the structure, and they let the veneer move in the direction of the wall plane. Without the ties, the veneer is a free-standing wall that can fall.

What is the usual spacing of the ties?

The codes limit the area of the wall supported by one tie, usually 2.67 ft² (0.25 m²) for a standard tie, and 3.5 ft² when a stricter tie is used. The ties are also limited in the spacing, often to 32 in in the horizontal direction and 18 in in the vertical direction. At the openings, extra ties are put at not more than 3 ft from each other around the opening, and within 12 in of its edge.

Why are extra ties needed around the openings?

At the openings, the veneer is interrupted and the edges are less restrained, so the wind and the movement concentrate there. The extra ties are put around the perimeter, at the sides and above the opening, to hold the edge. The same is done at the top of the wall, at the control joints and at the corners, where the code asks for a tighter spacing.

What are the limits of the calculator?

The calculator counts the ties from the area and from the perimeter of the openings, with the simple rules of a code. It does not check the ties in the corners, at the top of the wall and at the control joints, nor the type of tie for the backup wall, the corrosion protection, the height limits of the veneer or the details of the flashing and of the air space. The ties must be selected and installed according to the code.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.