Skip to content
Omnikalc

Newmark sliding block displacement calculator

Enter the static factor of safety, the slope angle and the peak ground acceleration to get the critical acceleration and the expected permanent displacement of the slope in an earthquake.

Updated on
Your inputs

Value out of range

°

Value out of range

g

Value out of range

Results

Expected Newmark displacement

0.28 in

Critical (yield) acceleration
0.211 g
Ratio of critical to peak acceleration
0.528
Lower estimate (one standard deviation)
0.09 in
Upper estimate (one standard deviation)
0.90 in
Typical performance (0 under 2 in, 1 to 6 in, 2 to 20 in, 3 above)
0

The Newmark sliding block displacement calculator gives the critical acceleration, the ratio to the peak acceleration, the expected permanent displacement of a slope in an earthquake, a one-standard-deviation range and a typical performance class.

How the calculation works

  • Enter the static factor of safety of the slope and its angle.
  • Enter the peak ground acceleration expected at the site, in units of g.
  • Read the critical acceleration and the displacement with its range.

Example

A slope with a static safety factor of 1.5 and an angle of 25 ° has a critical acceleration of 0.211 g. Under a peak acceleration of 0.4 g, the ratio is 0.528 and the Newmark displacement is 0.28 in, with a range from 0.09 in to 0.90 in. The performance class is 0.

Why it matters

The calculator helps geotechnical and geological engineers, students and planners who screen the seismic stability of natural slopes, embankments, landfills or road cuts, and who need a quick estimate of the permanent displacement before a more detailed dynamic analysis.

Good to know

The critical acceleration formula is for a dry, infinite slope with a planar failure surface, so use a slope stability analysis to find it in other cases. The regression assumes typical shallow crustal earthquakes, and the scatter is large: the true value can be about three times higher or lower. The method does not account for the loss of strength in saturated or liquefiable soils, for topographic amplification or for a rotational failure. Use the result to compare options and to flag slopes for further study.

The infinite slope stability calculator gives the static factor of safety, the Mononobe–Okabe calculator covers the earth pressure on walls in earthquakes, the seismic base shear calculator estimates the load on buildings and the earthquake magnitude calculator converts energy and magnitude.

Frequently asked questions

What is the Newmark sliding block method?

Newmark proposed in 1965 to treat a landslide mass as a rigid block on an inclined plane. The block slips only when the ground acceleration exceeds a critical (yield) acceleration, and the permanent displacement is found by integrating twice the part of the acceleration record above that threshold. The result is an index of the damage, not a prediction of exact movement.

How is the critical acceleration found?

For an infinite dry slope, the critical acceleration in units of g is ac = (FS − 1) sin α, where FS is the static factor of safety and α the slope angle. In general it is the horizontal pseudo-static coefficient that brings the factor of safety to 1, and it must be found from a slope stability analysis for other geometries.

Which regression is used?

The calculator uses the empirical equation of Jibson (2007), log Dn = 0.215 + log[(1 − ac/amax)^2.341 × (ac/amax)^−1.438], with Dn in centimeters and a standard deviation of 0.51 in log10 units. It gives the displacement from the ratio of the critical acceleration to the peak ground acceleration, for typical earthquakes.

What displacements are a concern?

A displacement below about 5 cm (2 in) is usually considered negligible, 5 to 15 cm (2 to 6 in) may cause minor cracking, 15 to 50 cm (6 to 20 in) can damage structures and roads, and more than 50 cm indicates a likely failure. These are rough guides, and the acceptable value depends on the structure.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.