The NIOSH lifting equation calculator gives the recommended weight limit and the lifting index of a manual lifting task from the distances, the twist, the frequency and the grip.
How the calculation works
- Enter the weight of the load, the horizontal distance of the hands from the body, the height at the start, the travel distance and the asymmetry angle.
- Enter the frequency multiplier from the NIOSH table and choose the coupling.
- The calculator gives the multipliers, the recommended weight limit and the lifting index.
Example
A worker lifts 25 lb with the hands 12 in from the body, starting 20 in above the floor, with a travel of 30 in and a twist of 30°, with a frequency multiplier of 0.94 and fair coupling (0.95). The multipliers are HM = 0.833, VM = 0.925, DM = 0.880 and AM = 0.904. The recommended weight limit is 51 × HM × VM × DM × AM × FM × CM = 27.93 lb, and the lifting index is 25 / 27.93 = 0.90.
Why it matters
The calculator helps safety officers, supervisors, ergonomists, estimators and students to evaluate the manual handling of materials on a site or in a shop, to compare layouts and to see how much a change of height or distance reduces the risk.
Good to know
Measure the distances at the start of the lift and, if the lift is also demanding at the end, evaluate both positions. Use the horizontal distance from the middle of the hands to the point between the ankles, and keep the load close to the body. The best height for the hands is about 30 in, at knuckle height, and the weight limit falls as the load starts lower or higher. Reduce the twist by turning the feet, and use the frequency table for the number of lifts per minute and the duration. A lifting index above 1 is a sign to use a cart, a hoist or a team lift.
Related tools
The fall protection clearance calculator gives the distance below a worker, the silica dust calculator gives the exposure to dust, the noise exposure calculator gives the daily dose of noise and the forklift capacity calculator derates a truck for the load center.