Skip to content
Omnikalc

Plumbing fixture count calculator for an office or an assembly building

Enter the number of occupants, the type of building and the share of women to get the number of water closets, lavatories and drinking fountains with the common plumbing code ratios.

Updated on
Your inputs

Value out of range

%

Value out of range

Results

Water closets required

5

Water closets for women
3
Water closets for men
2
Lavatories required
4
Drinking fountains required
2

The plumbing fixture count calculator gives the number of water closets, split between women and men, the lavatories and the drinking fountains for an office or an assembly building, from the number of occupants, the type of building and the share of women.

How the calculation works

  • Enter the number of occupants and choose the type of building.
  • Enter the share of women among the occupants.
  • The calculator finds the water closets, split between women and men, the lavatories and the drinking fountains.

Example

An office with 180 occupants needs 2 water closets for the first 50 people, then 1 for each 50 more: 2 + ⌈130 / 50⌉ = 5 water closets. With 50 % women, that is 3 for women and 2 for men. For lavatories, 2 for the first 80, then 1 for each 80: 2 + ⌈100 / 80⌉ = 4 lavatories. The drinking fountains are 1 for each 100, that is 2.

Why it matters

The calculator helps architects, tenants, developers, project managers and students to make a first count of the fixtures of a floor plan, to see how the number of occupants changes the program of the restrooms, and to check a layout before the design review of the building department.

Good to know

Use the real occupant load that the code gives for the floor and not the number of desks. Round up and check the exact table of the local code, because a small difference in the ratio changes the count. Place the restrooms near the stairs and the core to save the plumbing, and add the accessible fixtures, the family rooms and the service sink that the code asks for.

The fixture unit drain sizing calculator sizes the drains from the fixtures, the jobsite portable toilets count calculator gives the toilets of a work site, the occupant load egress width calculator gives the load and the exits of a space and the water heater size calculator sizes the heater of a building.

Frequently asked questions

What ratios does the calculator use?

For an office, it uses 1 water closet for each 25 occupants up to 50, then 1 for each 50, 1 lavatory for each 40 up to 80, then 1 for each 80, and 1 drinking fountain for each 100. For an assembly hall, it uses 1 water closet for each 40 up to 80, then 1 for each 80, 1 lavatory for each 200 and 1 fountain for each 1,000.

Is this the same as the building code?

The ratios follow the common model plumbing code for the business and assembly occupancies, but the code that applies to your project may be different. Local amendments, the age of the building, the type of use and the split between men and women can change the count. Always check the table of the local code with the building department.

How is the split between men and women made?

The calculator multiplies the total number of water closets by the share of women and rounds up, and the men get the rest. Many codes ask for an equal number for both sexes, and many allow urinals to replace part of the men's water closets. Single-user and all-gender rooms can also change the count.

What does the calculator not include?

The calculator does not include the accessible fixtures, the service sink, the family rooms, the showers, the baby changing stations, the fixtures for the staff in a restaurant or a school, or the plumbing for the kitchens. Use the specific table of the code for each use, and add the accessible fixtures that the accessibility code requires.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.