Skip to content
Omnikalc

Roundabout capacity calculator: capacity and delay of a roundabout entry

Choose the type of entry and enter the circulating flow and the entry flow to get the entry capacity, the volume to capacity ratio, the control delay and the level of service of a roundabout.

Updated on
Your inputs
pc/h

Value out of range

pc/h

Value out of range

Results

Control delay

17.3 s/veh

LOS C: delay of 15 to 25 s
Entry capacity
748 pc/h
Volume to capacity ratio
0.67
Level of service (A = 1 to F = 6)
3

The roundabout capacity calculator gives the entry capacity, the volume to capacity ratio, the control delay and the level of service of a roundabout entry, with the HCM exponential capacity model, from the circulating flow and the entry flow.

How the calculation works

  • Choose the type of entry: a single lane, or the right or the left lane of a two-lane entry.
  • Enter the circulating flow in front of the entry and the entry flow in the lane, both in passenger car equivalents per hour.
  • The calculator finds the entry capacity with the HCM equation, the volume to capacity ratio, the control delay and the level of service.

Example

A single-lane entry has a circulating flow of 600 pc/h and an entry flow of 500 pc/h. The capacity is c = 1,380 × exp(−0.00102 × 600) = 748 pc/h. The ratio is x = 500 / 748 = 0.67. The delay is 3600 / 748 + 225 × [(0.67 − 1) + √((0.67 − 1)² + (3600 / 748) × 0.67 / 112.5)] + 5 × 0.67 = 17.3 s/veh, which is level of service C (index 3).

Why it matters

The calculator helps traffic engineers, planners, municipal staff, developers and students to check a roundabout entry in a first analysis, to compare it with a signal or a stop control and to see how the circulating flow reduces the capacity of the entry.

Good to know

Convert the heavy vehicles to passenger car equivalents and use the peak 15-minute flow. Check each entry and each lane, and look at the queue and at the exit. Compare with the field data when it exists, and calibrate the model for the local conditions. Remember that the capacity falls quickly when the circulating flow increases, so a roundabout that works well in the morning peak can be near capacity in the evening peak.

The traffic signal cycle length calculator sizes a signal, the stopping sight distance calculator checks the visibility at the entry, the stopping distance calculator gives the braking distance and the horizontal curve calculator checks the geometry of the approaches.

Frequently asked questions

How is the capacity of a roundabout entry found?

The capacity of an entry depends on the circulating flow in front of it, because the entering drivers have to find a gap in the circulating traffic. The HCM 6th edition gives an exponential equation: c = 1,380 exp(−1.02 × 10⁻³ vc) for a single-lane entry, where vc is the circulating flow in pc/h. For a two-lane entry, the right lane has c = 1,420 exp(−0.85 × 10⁻³ vc) and the left lane c = 1,350 exp(−0.92 × 10⁻³ vc).

How is the delay calculated?

The control delay is d = 3600/c + 900 T [(x − 1) + √((x − 1)² + (3600/c) x / (450 T))] + 5 min(x, 1), where x is the volume to capacity ratio, c the capacity in pc/h and T the analysis period, 0.25 h for 15 minutes. The first term is the service time, the second one is the delay from the queue, and the third one the geometric delay for the slowing at the entry.

What are the levels of service?

For a roundabout, the level of service depends on the control delay, with A for 10 s or less, B for 10 to 15 s, C for 15 to 25 s, D for 25 to 35 s, E for 35 to 50 s and F for more than 50 s. With a volume to capacity ratio of more than 1, the level of service is F, whatever the delay. The calculator gives the level as an index, 1 for A to 6 for F.

What are the limits of the calculator?

The calculator applies the HCM capacity model for the entries of single-lane and two-lane roundabouts, with the default parameters. It does not include the effect of the pedestrians, the bypass lanes, the heavy vehicles that must be converted to passenger car equivalents, the exit capacity, the queue length or the calibration to the local driver behavior. A roundabout design needs a traffic engineer.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.