Skip to content
Omnikalc

Sill plate anchor bolt spacing and count calculator

Enter the length of the sill plate, the length of a piece, the maximum spacing, the end distance and the wind uplift to get the number of anchor bolts, the spacing and the load on a bolt.

Updated on
Your inputs
ft

Value out of range

ft

Value out of range

ft

Value out of range

ft

Value out of range

lb/ft

Value out of range

Results

Anchor bolts required

40

Pieces of sill plate
10
Bolts in each piece
4
Actual spacing of the bolts
4.67 ft
Uplift load on one bolt
700 lb

The sill plate anchor bolt calculator gives the number of pieces of sill plate, the bolts in each piece, the total number of anchor bolts, the actual spacing and the uplift load on one bolt, from the length of the sill plate, the length of a piece, the maximum spacing, the end distance and the wind uplift.

How the calculation works

  • Enter the total length of the sill plate and the length of one piece.
  • Enter the maximum spacing of the bolts and the distance of the end bolts from the end of the plate.
  • Enter the wind uplift to get the pieces, the bolts, the actual spacing and the load on a bolt.

Example

A foundation wall with 160 ft of sill plate in pieces of 16 ft needs 10 pieces. With the end bolts 1 ft from the ends and a maximum spacing of 6 ft, each piece has ⌈14 / 6⌉ + 1 = 4 bolts, that is 40 anchor bolts. The actual spacing is 14 / 3 = 4.67 ft. With an uplift of 150 lb/ft, each bolt carries 150 × 4.67 = 700 lb.

Why it matters

The calculator helps builders, framers, foundation contractors, inspectors and homeowners to count the anchor bolts before they order them, to place them before the pour, and to check that the spacing respects the code and gives a load per bolt that the bolt can carry.

Good to know

Set the bolts in the wet concrete with a template, so that they come out at the right place along the plate and with the right height above the slab. Check that the plate has two bolts in each piece, and one near each end. Use washers of the right size, tighten the nuts after the plate is set and the concrete has cured, and follow the drawings when the shear walls need closer bolts.

The anchor bolt pullout calculator gives the capacity of a bolt in the concrete, the shear wall demand and hold-down calculator gives the loads of a braced wall, the wind load calculator gives the pressure on a building and the base plate size calculator sizes the plate of a steel column.

Frequently asked questions

What are the usual rules for the bolts?

The residential code asks for bolts of 1/2 in diameter at a spacing of 6 ft at most, with at least two bolts in each piece of plate, and one bolt within 12 in of each end and at least 7 bolt diameters from it. Some regions and the shear wall designs ask for a closer spacing or larger washers. Check the drawings and the local code.

How does the calculator find the number of bolts?

Each piece of plate has one bolt near each end, and the middle part is divided into spaces that are not longer than the maximum spacing. The number of bolts in a piece is the number of spaces plus one. The calculator then multiplies by the number of pieces, and shows the actual spacing, which is a bit smaller than the maximum.

What is the load on a bolt?

The uplift per foot of the wall, in lb/ft, times the actual spacing of the bolts is the tension that each bolt carries. Compare it with the allowable tension of the bolt in the concrete and the capacity of the washer and the plate. Shear and overturning loads from the shear walls are checked separately, with the hold-downs.

What are the limits of the calculator?

The calculator uses a straight run of plate. It does not include the corners, the openings, the doors, the hold-downs, the lateral loads, the cuts of the plate, the edge distance in the concrete or the slab edge. Anchor bolts must be set in place before the concrete sets, so check the layout with the foundation drawing before the pour.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.