Skip to content
Omnikalc

Stadia tacheometry distance and elevation calculator

Enter the three hair readings, the vertical angle, the instrument height and the station elevation to get the horizontal distance and the elevation of the rod point.

Updated on
Your inputs
ft

Value out of range

ft

Value out of range

ft

Value out of range

°

Value out of range

ft

Value out of range

ft

Value out of range

Value out of range

Results

Horizontal distance

270.99 ft

Stadia interval
2.72 ft
Vertical difference of the line of sight
16.57 ft
Elevation of the rod point
115.09 ft
Middle hair check
0.000 ft
The middle hair is the mean of the two stadia hairs
Distance error for 0.01 ft of interval error
1.00 ft

The stadia calculator gives the horizontal distance, the vertical difference and the elevation of the rod point from the three hair readings, the vertical angle, the height of the instrument and the elevation of the station, and checks the readings.

How the calculation works

  • Enter the upper, lower and middle hair readings on the rod and the vertical angle of the line of sight.
  • Enter the height of the instrument, the elevation of the station and the stadia factor K, 100 for most instruments.
  • The calculator gives the horizontal distance, the vertical difference, the elevation of the point and a check of the readings.

Example

The hairs read 7.84 ft and 5.12 ft on the rod, with the middle hair at 6.48 ft, so the stadia interval is 2.72 ft. The vertical angle is +3.5°. The horizontal distance is 100 × 2.72 × cos² 3.5° = 270.99 ft and the vertical difference is 0.5 × 100 × 2.72 × sin 7° = 16.57 ft. With the instrument 5.00 ft above a station at elevation 100.00 ft, the point is at 100.00 + 5.00 + 16.57 − 6.48 = 115.09 ft. An error of 0.01 ft in the interval moves the distance by 1.00 ft.

Why it matters

The calculator helps surveying students, field crews, engineers and archaeologists to reduce stadia notes, to check a measured distance and to see how the angle and the reading errors change the result.

Good to know

Read the upper hair, the lower hair and the middle hair, in that order, and write them down at once. Keep the rod plumb with a rod level, and avoid readings of the lower hair below about 1 ft. Do not use the method for a boundary or a layout that needs a precision above 1 in 500, and use a total station instead.

The differential leveling misclosure calculator checks a level loop, the traverse closure calculator checks a closed traverse, the horizontal curve calculator gives the layout of a road curve and the polygon area calculator gives the area from the coordinates.

Frequently asked questions

What is stadia tacheometry?

Stadia tacheometry measures a distance and a height difference with a single sighting on a graduated rod, using the two stadia hairs in the reticle of the instrument. The interval between the hairs on the rod is proportional to the distance, with a factor K of 100 for most instruments. It is a fast method for topographic detail and for checks, with a precision of about 1 in 300 to 1 in 500 for the distance.

What are the formulas?

For a sloping sight at a vertical angle α above the horizon, the horizontal distance is H = K s cos² α and the vertical difference is V = (K s / 2) sin 2α, where s is the stadia interval on the rod. The constant C of old external-focusing instruments is zero for the modern internal-focusing ones, so the calculator omits it. The elevation of the rod point is the elevation of the station plus the height of the instrument plus V minus the middle hair reading.

What are the usual errors?

The main error is reading the hairs, since an error of 0.01 ft on the interval is 1 ft on the distance at K = 100. A rod that is not plumb, the refraction near the ground, a rod reading below 1 ft at long sights and the parallax of the reticle also add error. Keep the sights short, read the three hairs and check that the middle hair is the mean of the other two, as the calculator does.

When is it used today?

Total stations and GNSS receivers have replaced stadia for most surveys, but the method remains useful in a training course, in a rough check of a distance, in a topographic sketch where the accuracy is low and when the electronic instrument fails. It is also a good way to understand the geometry of the sight and the sources of error of an optical level or theodolite.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.