Skip to content
Omnikalc

Tack coat calculator: emulsion rate and quantities for a paving job

Enter the area, the residual asphalt rate, the residue of the emulsion, the dilution and the allowance to get the emulsion rate, the spray rate, the emulsion to order and the water to add.

Updated on
Your inputs
yd²

Value out of range

gal/yd²

Value out of range

%

Value out of range

%

Value out of range

Results

Emulsion to order

1,292 gal

Undiluted emulsion rate
0.0615 gal/yd²
Typical range for a tack coat
Spray rate of the diluted mix
0.1231 gal/yd²
Water to add
1,292 gal

The tack coat calculator gives the undiluted emulsion rate, the spray rate of the diluted mix, the emulsion to order and the water to add for a tack coat under an asphalt overlay, from the residual asphalt rate, the residue of the emulsion and the dilution.

How the calculation works

  • Enter the area to tack, the design residual asphalt rate and the residual asphalt content of the emulsion.
  • Choose the dilution of the emulsion and enter the waste and overlap allowance.
  • The calculator finds the undiluted emulsion rate, the spray rate of the diluted mix, the emulsion to order and the water to add.

Example

A tack coat of 0.04 gal/yd² of residual asphalt is sprayed with an emulsion that has 65 % of residue, so the undiluted rate is 0.04 / 0.65 = 0.0615 gal/yd². With a 1:1 dilution, the spray rate is 0.1231 gal/yd². On 20,000 yd² with a 5 % allowance, the job needs 0.0615 × 20,000 × 1.05 = 1,292 gal of emulsion and 1,292 gal of water.

Why it matters

The calculator helps paving contractors, inspectors, public works crews and students to order the right quantity of emulsion, to set the rate of the distributor and to check a delivery of emulsion, and it shows how the dilution and the residue change the quantity of liquid to spray on the road.

Good to know

Spray the tack coat on a clean and dry surface, sweep the dust and the loose material first, and wait for the emulsion to break, when it turns from brown to black, before the paver arrives. Keep the trucks off the tacked surface as much as possible to avoid pick-up. Check the spray bar for blocked nozzles, and measure the real rate with a catch pad at the start of the job.

The chip seal aggregate and emulsion rate calculator sizes a surface treatment, the asphalt paver production and trucks calculator plans the paving crew, the driveway paving cost calculator estimates a small paving job and the pavement marking paint quantity calculator estimates the paint for the lines.

Frequently asked questions

What is a tack coat?

A tack coat is a very light spray of asphalt emulsion on an existing pavement or on a new lift, before the next layer of asphalt is placed. It bonds the two layers so that they work as one structure. Without a good bond, the layers can slip, crack and peel under the traffic, mainly in the curves and at the intersections.

Why is the emulsion diluted?

A tack coat needs a very small quantity of residual asphalt, and it is hard to spray such a small quantity of pure emulsion in an even film. The emulsion is therefore mixed with water, often in equal parts, which doubles the volume to spray and makes the film more even. The water breaks out and evaporates, and the residual asphalt stays on the surface to bond the layers.

What is the typical rate?

The typical residual rate is from 0.02 to 0.05 gal/yd², or 0.09 to 0.23 L/m², depending on the texture and the age of the surface. A milled or an old and dry surface takes more, and a new and smooth surface takes less. Too much tack coat makes a slippery film that causes the layers to slide, and too little leaves some areas without a bond.

What are the limits of the calculator?

The calculator converts a design rate of residual asphalt into the quantities of emulsion and water. It does not choose the rate, which depends on the specification and on the surface, and it does not include the loss in the hoses and the tank, the spray on the curbs or the skips at the joints. Always check the real rate on site with a catch pad and the distributor tank readings.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.