Skip to content
Omnikalc

Biochar application rate calculator

Enter the percentage of biochar by soil mass, the depth of incorporation, the soil bulk density and the area to get the tons to apply, the stable carbon, the CO2 equivalent and the cost.

Updated on
Your inputs
%

Value out of range

in

Value out of range

lb/ft³

Value out of range

ac

Value out of range

%

Value out of range

%

Value out of range

USD/ton

Value out of range

Results

Biochar to apply per acre

5.9 tons/ac

Total biochar for the area

5.9 tons

Cost of the biochar

2,352 USD

Soil mass in the layer
588 tons/ac
Stable carbon applied per acre
3.29 tons/ac
CO2 equivalent stored per acre
12.1 tons/ac
Cost per ton of CO2 equivalent stored
195 USD

The biochar application rate calculator converts a target percentage of biochar by soil mass into tons to apply per acre and for the whole area, and estimates the stable carbon, the CO2 equivalent stored and the cost of the material.

How the calculation works

  • Enter the percentage of biochar by soil mass, the depth of incorporation and the bulk density of the soil.
  • Enter the area, the carbon content and the stable share of the biochar.
  • Enter the price and read the rate, the total, the carbon and the cost.

Example

Mixing 1 % of biochar into 4 in of soil at 81 lb/ft³ means 5.9 tons/ac, since the layer weighs 588 tons/ac. For 1 ac, the total is 5.9 tons. With a carbon content of 70 % and a stable share of 80 %, the stable carbon is 3.29 tons/ac, equal to 12.1 tons/ac of CO2 equivalent. At the price entered, the material costs 2,352 USD.

Why it matters

The calculator helps gardeners, farmers, researchers and carbon project planners who read a trial in percent of soil mass and need the tonnage to order, the cost of the treatment, and an estimate of the carbon that it stores in the soil.

Good to know

The percentage is by dry mass of soil in the layer where the biochar is mixed, so a shallower mixing depth needs less material for the same percentage. Use a measured bulk density when possible. The carbon content and the stable fraction depend on the feedstock and the temperature of pyrolysis, so take them from the product data sheet. The CO2 equivalent counts only the carbon that remains in the soil, and ignores the emissions of production, transport and spreading, which a full life-cycle assessment would subtract. Test a small plot before treating a whole field.

The compost ratio calculator mixes organic materials, the soil unit weight calculator gives the density of a soil, the manure application calculator handles organic fertilizer and the soil test ppm calculator converts a laboratory result to pounds per acre.

Frequently asked questions

What is biochar?

Biochar is a charcoal produced by heating biomass, such as wood chips or crop residues, with little or no oxygen, a process called pyrolysis. It is a porous, carbon-rich solid. When it is added to soil, it can improve water retention and nutrient holding, and it stores carbon for decades or centuries because it decomposes very slowly.

What rate is used in practice?

Field trials have used from less than 1 to 10 percent by soil mass in the top layer, which is roughly 5 to 50 tons per acre. Small rates of 1 to 2 percent are common for economic reasons, since biochar is expensive. Results depend on the soil, and sandy or acid soils tend to respond better than fertile ones.

How is the carbon stored computed?

The mass of biochar is multiplied by its carbon content, typically 60 to 80 percent, and by the share of that carbon that stays stable in the soil, often assumed to be 70 to 80 percent for a good biochar. One ton of carbon corresponds to 3.667 tons of carbon dioxide, the ratio of the molar masses 44 and 12.

Should the biochar be charged before use?

Often yes. Fresh biochar is a sponge that can take nutrients from the soil in the first season. Mixing it with compost, manure or a nutrient solution before application loads it with nutrients and microbes. The calculator gives the quantity only, and does not describe this preparation.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.