Skip to content
Omnikalc

Carburetor CFM calculator: what carburetor size does your engine need?

Enter the engine displacement, maximum rpm and volumetric efficiency to get the airflow demand in CFM and compare it with the carburetor you are considering.

Updated on
Your inputs

Value out of range

rpm

Value out of range

%

Value out of range

CFM

Value out of range

Results

Engine airflow demand (CFM)

516.5 CFM

Displacement in cubic inches
350.0 in³
Airflow at 100 % volumetric efficiency
607.6 CFM
Airflow demand in cubic meters per hour
877.5 m³/h
Carburetor rating as a share of the demand
116.2 %
Between 90 % and 130 %: a sensible match

Choosing a carburetor starts with the air the engine can swallow. The carburetor CFM calculator takes the engine displacement, the maximum rpm, the volumetric efficiency and the rating of a carburetor, and gives the airflow demand in cubic feet per minute and cubic meters per hour, the airflow at 100 % efficiency and the carburetor rating as a share of the demand.

How the calculation works

  • Enter the engine displacement and pick its unit: cubic inches, liters or cubic centimeters.
  • Enter the maximum engine speed in rpm and the volumetric efficiency, which is about 75 to 85 % for a mild street engine and 90 % or more for a tuned engine.
  • The airflow demand is CFM = displacement in cubic inches × rpm × volumetric efficiency ÷ 3456. The constant 3456 comes from the fact that a four-stroke engine fills each cylinder once every two turns.
  • Enter the rating of the carburetor you are considering to see it as a share of the demand. Between 90 % and 130 % is a sensible match.

Example

A 350 cubic inch engine turns at up to 6,000 rpm with a volumetric efficiency of 85 %. At 100 % efficiency, the airflow is 350 × 6,000 ÷ 3,456 = 607.6 CFM, and at 85 % the engine needs 516.5 CFM, or about 878 m³/h. A 600 CFM carburetor is 116.2 % of this demand, which is a good match.

Why it matters

Engine builders and restorers use the airflow demand to pick a carburetor that is neither too small, which limits power, nor too large, which makes the engine sluggish at low speed.

Good to know

This is a guide, not a tuning result. Volumetric efficiency varies with rpm and is only an estimate, ratings are measured under standard conditions, and the best size also depends on the camshaft, the intake and the intended use. Ask an engine builder before buying.

The air-fuel ratio calculator covers the mixture, and the air density calculator shows how altitude and temperature change the air the engine receives.

Frequently asked questions

How is the carburetor CFM calculated?

The formula is CFM = displacement in cubic inches × maximum rpm × volumetric efficiency ÷ 3456. It is the volume of air that a four-stroke engine draws in each minute at its maximum speed, expressed in cubic feet per minute.

What is volumetric efficiency?

It is the ratio between the air that the engine actually draws in and the air that fills the displacement. A stock street engine is often around 75 to 85 %, a tuned engine with a good camshaft and heads reaches 90 to 100 %, and a supercharged engine can exceed 100 %.

Is a bigger carburetor better?

Not always. A carburetor that is too large reduces the air speed through the venturis at low and medium rpm, which hurts fuel mixing, throttle response and economy. A common advice is to choose a rating close to the calculated demand, a little above it for a race engine.

Why do carburetors have a rating at a fixed pressure drop?

Carburetor CFM ratings are measured at a standard pressure drop, such as 1.5 inches of mercury for a four-barrel. The real flow depends on the conditions, so the rating is a way to compare carburetors, not an exact measure of the airflow.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.