The enclosed garage ventilation calculator gives the exhaust airflow in cfm, the air changes per hour, the number of exhaust fans and the airflow per fan for an enclosed parking garage, from the floor area, the ceiling height, the exhaust rate and the capacity of a fan.
How the calculation works
- Enter the floor area and the ceiling height of the garage.
- Enter the exhaust rate required, in cfm per square foot, and the capacity of one fan.
- The calculator finds the airflow, the air changes per hour, the number of fans and the airflow per fan.
Example
An enclosed garage of 12,000 ft² with a ceiling height of 10 ft needs an exhaust airflow of 12,000 × 0.75 = 9,000 cfm. That is 9,000 × 60 / (12,000 × 10) = 4.5 air changes per hour. With fans of 4,000 cfm the garage needs 9,000 / 4,000 = 2.25, rounded up to 3 fans, each moving 3,000 cfm.
Why it matters
The calculator helps mechanical engineers, contractors, building owners, inspectors and designers to estimate the ventilation of a parking garage in the early stage of a project, to compare the number of fans of different sizes, and to check the order of magnitude of a design.
Good to know
Round the number of fans up and add one more fan for the redundancy if the garage is large, so that the failure of one unit does not stop the ventilation. Use the sensors of carbon monoxide to cut the energy use, and put them at the breathing height, near 4 to 6 ft, with one sensor for each 5,000 ft². Provide make-up air so that the garage does not run under a strong negative pressure.
Related tools
The air changes calculator gives the ventilation of a room, the residential ventilation rate calculator gives the airflow for a house, the indoor CO2 ventilation calculator gives the ventilation needed for the occupants and the duct size calculator gives the size of a duct for an airflow.