Skip to content
Omnikalc

Sodium adsorption ratio (SAR) calculator

Enter the sodium, calcium and magnesium of an irrigation water and its electrical conductivity to get the SAR, the estimated soil exchangeable sodium and the salinity and sodium hazard classes.

Updated on
Your inputs
mg/L

Value out of range

mg/L

Value out of range

mg/L

Value out of range

dS/m

Value out of range

Results

Sodium adsorption ratio (SAR)

3.31

Estimated exchangeable sodium percentage (ESP)

3.5 %

Sodium
5.22 meq/L
Calcium + magnesium
4.97 meq/L
Sodium hazard class (0 low under 10, 1 medium, 2 high from 18, 3 very high from 26)
0
Salinity hazard class (0 low under 0.25 dS/m, 1 medium, 2 high from 0.75, 3 very high from 2.25)
2

The sodium adsorption ratio calculator gives the SAR of an irrigation water from its sodium, calcium and magnesium, the estimated exchangeable sodium percentage of the soil, and the sodium and salinity hazard classes from the SAR and the electrical conductivity.

How the calculation works

  • Enter the sodium, calcium and magnesium concentrations of the water in mg/L from a lab report.
  • Enter the electrical conductivity of the water in dS/m (the same number as mmhos/cm).
  • Read the SAR, the ESP and the two hazard classes.

Example

A water with 120 mg/L, 60 mg/L and 24 mg/L contains 5.22 meq/L of sodium and 4.97 meq/L of calcium plus magnesium. The SAR is 3.31, which corresponds to an ESP of about 3.5 %. With a conductivity of 1.2 dS/m, the sodium hazard class is 0 and the salinity class 2.

Why it matters

The calculator helps farmers, gardeners, agronomy students and well owners who read a water analysis for irrigation and want to know whether the sodium will damage the soil structure, and whether a gypsum treatment or another water source could be necessary.

Good to know

Use concentrations in milligrams per liter from a recent laboratory analysis, and the conductivity in decisiemens per meter. This version is the simple SAR, without the adjustment for bicarbonate and carbonate that is sometimes applied to waters rich in bicarbonate, where calcium can precipitate. The ESP is an estimate in equilibrium, which takes years to reach in the field. The risk of infiltration problems depends on the SAR together with the EC, so a low EC with a moderate SAR can still cause crusting. A local extension service gives the limits for your crops.

The available water capacity calculator describes the water a soil holds, the crop water need calculator estimates the irrigation volume, the ionic strength calculator handles salt solutions and the molarity calculator converts concentrations.

Frequently asked questions

What is the sodium adsorption ratio?

The SAR measures the sodium hazard of irrigation water or of a soil extract. It compares the concentration of sodium with that of calcium and magnesium: SAR = Na / √[(Ca + Mg) / 2], with the concentrations in milliequivalents per liter. A high SAR means that sodium will replace calcium on the clay particles of the soil and degrade its structure.

Why is sodium a problem for soils?

Sodium makes clay particles disperse instead of staying in aggregates. A sodic soil seals at the surface, drains slowly and forms a crust, so the water infiltrates badly even if the salinity is low. This reduces the yield. The effect depends on the SAR and also on the electrical conductivity, since a more saline water keeps the clay flocculated.

How is the ESP estimated?

The exchangeable sodium percentage is the share of the cation exchange capacity occupied by sodium. In equilibrium with an irrigation water, it follows the USDA relation ESP = 100 (−0.0126 + 0.01475 SAR) / [1 + (−0.0126 + 0.01475 SAR)]. A soil is generally considered sodic above an ESP of 15 percent.

What are the usual limits?

The classic diagram of the US Salinity Laboratory classifies waters by salinity (C1 to C4) and by sodium hazard (S1 to S4). A SAR under 10 is low, 10 to 18 medium, 18 to 26 high and above 26 very high. Because the real risk depends on the EC, the soil texture and the crop, use these classes as a screening tool.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.