Skip to content
Omnikalc

Fill rate calculator: how much demand do you actually fill from stock?

Enter lead time demand, its variation, the reorder point and the order quantity to get the fill rate, the cycle service level and the expected shortage.

Updated on
Your inputs

Value out of range

Value out of range

Value out of range

Value out of range

Results

Fill rate (share of demand met from stock)

98.75%

Excellent service
Cycle service level (no stockout in a cycle)
84.1%
Safety stock
30
Safety factor (z)
1.00
Expected units short per cycle
2.50
Expected shortage per 100 units ordered
1.25

A stockout is not all or nothing, and what customers feel is how many units are short. This fill rate calculator takes the average lead time demand, its variation, your reorder point and the order quantity and shows the fill rate, the cycle service level, the safety stock and the expected units short per replenishment cycle, using a normal demand model.

How the calculation works

  • Safety stock = reorder point − average demand during the lead time.
  • z = safety stock ÷ standard deviation of lead time demand.
  • Loss function L(z) = φ(z) − z × (1 − Φ(z)), where φ and Φ are the normal density and distribution.
  • Expected shortage per cycle = standard deviation × L(z).
  • Fill rate = 1 − expected shortage ÷ order quantity.

Example

Demand during the lead time averages 100 units with a standard deviation of 30. A reorder point of 130 gives a safety stock of 30 and z = 1.00. The cycle service level is 84.1 %, but the expected shortage is only 2.5 units per cycle, so with orders of 200 units the fill rate is 98.75 %.

Why it matters

Two products with the same service level can behave very differently if one orders in big lots and the other orders often. The fill rate counts the units, so it gives a fairer picture of what customers experience and lets you set the safety stock for a service target without holding more stock than you need.

Good to know

The fill rate is higher for larger order quantities because a given shortage is spread over more units. The model assumes normal demand and a fixed lead time and ignores backorders versus lost sales. Use the standard deviation of demand over the whole lead time, not per day. A target of 95 to 99 percent is common for stocked items, and the cost of extra safety stock rises quickly beyond that. Revisit the reorder point whenever demand or lead time changes.

The reorder point calculator sets the trigger from a service level, the EOQ calculator finds the best order quantity, and the inventory turnover calculator shows how fast stock sells.

Frequently asked questions

What is the fill rate?

The share of demand that you can serve immediately from stock. A fill rate of 98 percent means 2 out of every 100 units requested are short.

How is it different from the service level?

The cycle service level is the chance of not stocking out in a replenishment cycle, while the fill rate counts how many units are short when it happens.

Why can the fill rate be higher than the service level?

A stockout often happens at the end of a cycle and involves few units, so most demand is still served.

How do I raise the fill rate?

Add safety stock, order in larger quantities or shorten and stabilize the lead time.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.